Sony CDP-D11 CD Player User Manual


 
Basic playback operation
6
1 Turn on the mixer and adjust fader or level of the
connected channel.
2 Turn on this unit.
3 Insert the disc.
8cm disc can be
played without
adapter.
Playback
z Playback can be started in
step 4 by selecting a track
number.
1 Turn the AMS control until
the desired track number is
displayed.
(To use the remote control,
press the = or + button.)
2 Press the AMS control or the
button.
z Ejecting function can be
turned not to work to avoid
ejecting the disc by mistake
during playback or pause
mode.
1 Press the MENU/EXIT button
in stop mode to display
“MENU Mode”.
2 Turn the AMS control until
“PLAY/PAUSE” is displayed,
then press the AMS control.
3 Turn the AMS control until
“EJECT Disable” is displayed,
then press the AMS control.
4 Press the MENU/EXIT button.
To change so that ejecting
function is always workable,
select “EJECT Enable” in step 3.
23 4
Label side up
What to be
To stop playback
To pause playback
To skip to the next track
To return to the previous
track
To eject the disc
Operation
Press p.
Press .
(Playback starts by pressing it again.)
Turn AMS to right.
(Press + in the remote control.)
Turn AMS to left.
(Press = in the remote control.)
Press § EJECT.
z To use the headphones
Connect headphones to PHONE
jack in the front panel.
Adjust the volume by PHONE
LEVEL control.
MENU/EXIT DISPLAY
A CUE
VARI
SPEED
PUSH MARK/ENTER
LOCATE
4 Press the button.
Playback starts.