Filter
Top Products
ǪÇÃëº
ǪÇÃëº
21
OTHERS
Treatment of compact
discs
How to treat
• Not to touch the side without label (playing side).
• Do not stick any paper or seal.
• Do not use a disc sticked with seals or pastes such as a
secondhand disc or a rental disc.
Such a disc may not be ejected by sticking to inside, or
may be a cause of trouble of the unit.
Preservation
• Do not leave discs in the places such as of high
temperature or high humidity, especially under the direct
sunlight.
• Store a disc in its case. If the discs are piled up or
standed without cases, they may become deformed.
Cleaning
• Fingerprints or dusts make the sound quality worse.
Keep the disc clean.
• To clean the disc, wipe it from the center out with a soft
cloth.
• If the disc is extremely dirty, use a soft cloth lightly
moistened with water, then wipe it with a dry cloth.
• Do not use benzine, record cleaner or medicine for
preventing static electricity as these could damage the
disc.
Troubleshooting guide
If you experience any of the following difficulties
while using the player, use this troubleshooting guide
to help you remedy the problem. Should any problem
persist, consult your nearest Sony dealer.
If “Disc Error” is displayed
/ It shows an unusual status in installing the disc or
the disc itself.
Remove the disc and check it.
There is no sound.
/ The connection cord is not connected firmly.
/ The amplifier is not operated correctly.
/ The PHONE LEVEL control is turned toward 0.
Turn it to right to increase the volume.
/ The AC cord is not connected firmly.
The unit does not play.
/ No disc is inside.
/ The disc is inserted upside down.
/ The disc is inserted inclined.
/ The disc is dirty.
/ The unit has condensation inside. Remove the
disc, and leave the unit for about an hour, then
turn on and try to operate again.
The remote control does not work.
/ There is an object between the unit and it.
/ It is not directed to the sensor on the main unit.
/ Replace the batteries with new ones.
/ Only the cable is connected to CTRL-S.
The unit does not function correctly.
/ The operation mechanism is not working correctly.
Turn off the power, then turn on again.
If the unit does not work correctly by any of the operations
above, disconnect the AC cord, then connect it again.