Sony CDP-D11 CD Player User Manual


 
OTHERS
20
Precautions
Installation
Do not place the unit on such as following.
On a rickety stand, uneven surface
On a carpet, bedclothes
Where the humidity is high, is poorly ventilated.
Where is dusty
Under the direct sunlight, where the temperature is high
Where the temperature is very low
Near the tuner, TV set, or video deck
(When this unit is used with such equipments, if played
on nearby, noises may be generated or pictures may be
distorted. Especially these troubles apt to happen when
using antennas for inside, we recommend to use outdoor
antennas.)
When adjusting the volume
Compact discs contains fewer noises than records.
If you listen to noises without sounds while adjusting the
volume as in records, unexpected high volume may be output
and speakers may be damaged.
Turn down the volume before play.
Etiquette toward listening
Listen to the sounds not to disturb a neighbor. Especially,
sounds are easily out in the night.
Shut the window, or use headphones to keep comfort.This is
the symbol mark of listening etiquette.
Note
If the User is not selected in “PARALLEL Select” of MENU
Mode, MENU for assignment of each pin is not displayed.
When Preset is selected, the standard setting functions of the
pins are displayed.
POUT1 to POUT 3 (output terminals)
PLAY Grounding during PLAY operation of the main unit
PAUSE Grounding during PAUSE operation of the main unit
NO DISC Grounding during NO DISC operation of the main unit
OFF Always floating
Electrical specifications
Input terminal
Input system Make contact
Input ON voltage Less than 0.5V
Input OFF voltage More than 3V
Opening terminal voltage 5V
Input pulse width More than 100msec
Input standing voltage -0.5 to +10V
Output terminal
Output system Open collector of NPN transister
Remaining voltage at ON Less than 0.5V
Maximum pouring current at ON 100mA
Standing voltage 20V
Notes on the Fader PLAY
Operation in the largest numbered track
To continue the Fader PLAY in the next track, select the
track to be played manually.
In the largest numbered track, it is designed mechanically
that the next track is not selected automatically by
“AMS+”. So, in the largest numbered track, play is
paused when the Fader is turned OFF.
To carry out 1 track repeat
When you want to repeat only one track with the Fader
PLAY, select the track number by the PROGRAM Mode,
and then set the REPEAT Mode to “ALL REPEAT”.
In the normal operation, it is designed mechanically that
by “AMS+” operation in the setting of 1 track repeat play
skips to the next track. So, 1 track repeat play is not
carried out on the track set at first.