Filter
Top Products
Additional Information
79
US
Surround (SS-TSB101) for BDV-HZ970W
Speaker system Full range Bass reflex
Speaker unit 55 mm × 80 mm (2
1
/4 in ×
3
1
/4 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 75 mm × 225 mm × 71 mm
(3 in × 8
7
/8 in × 2
7
/8 in)
(w/h/d)
Mass (approx.) 0.45 kg (1 lb)
Front/Surround (SS-TSIZ1) for BDV-
IZ1000W
Speaker system 2-Way 2-Driver speaker
system, Bass reflex
Speaker unit
Tweeter: 20 mm (
3
/4 in) cone type
Woofer: 40 mm × 70 mm (1
9
/16 in ×
2
3
/4 in) cone type
Rated impedance 3 ohms
Dimensions (approx.)
Front speaker (after assembly):
200 mm × 1,100 mm ×
230 mm (7
7
/8 in × 43
1
/3 in
× 9
1
/16 in) (w/h/d) (vertical
angle)
200 mm × 1,100 mm ×
255 mm (7
7
/8 in × 43
1
/3 in
× 10 in) (w/h/d) (upward
angle)
Surround speaker (after assembly):
103 mm × 335 mm ×
103 mm (4
1
/16 in × 13
3
/16
in × 4
1
/16 in) (w/h/d)
(vertical angle)
103 mm × 356 mm ×
103 mm (4
1
/16 in × 14 in ×
4
1
/16 in) (w/h/d) (upward
angle)
Mass (approx.)
Front speaker (after assembly):
2.9 kg (6 lb 6 oz)
Surround speaker (after assembly):
0.6 kg (1 lb 5 oz)
Center (SS-CTB101)
Speaker system Full range Acoustic
suspension, Magnetically
Shielded
Speaker unit 30 mm × 60 mm (1
3
/16 in ×
2
3
/8 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 290 mm × 49 mm × 49 mm
(11
1
/2 in × 1
15
/16 in ×
1
15
/16 in) (w/h/d)
Mass (approx.) 0.28 kg (10 oz)
Subwoofer (SS-WSB102) for BDV-HZ970W
Speaker system Subwoofer Bass reflex
Speaker unit 180 mm (7
1
/8 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 275 mm × 405 mm × 275
mm (10
7
/8 in × 16 in ×
10
7
/8 in) (w/h/d)
Mass (approx.) 7.5 kg (16 lb 12 oz)
Subwoofer (SS-WSIZ1) for BDV-IZ1000W
Speaker system Subwoofer Bass reflex
Speaker unit 180 mm (7
1
/8 in) cone type
Rated impedance 3 ohms
Dimensions (approx.) 275 mm × 405 mm × 275
mm (10
7
/8 in × 16 in ×
10
7
/8 in) (w/h/d)
Mass (approx.) 7.5 kg (16 lb 12 oz)
General
Power requirements 120 V AC, 60 Hz
Power consumption On: 110 W
Standby: 0.3 W (at the
Power Saving mode)
Dimensions (approx.) 430 mm × 83 mm × 355
mm (17 in × 3
3
/8 in ×
14
1
/8 in) (w/h/d) incl.
projecting parts such as the
wireless transceiver slot;
430 mm × 83 mm × 384
mm (17 in × 3
3
/8 in ×
15
1
/4 in) (w/h/d) incl. the
wireless transceiver
(EZW-RT10)
Mass (approx.) 5.3 kg (11 lb 11 oz)
Surround amplifier (TA-SA200WR)
Amplifier Section
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC) With 3 ohms loads, both
channels driven, from 120
- 20,000 Hz; rated 45 watts
per channel minimum
RMS power, with no more
than 1% total harmonic
distortion from 250 milli
watts to rated output.
POWER OUTPUT (reference)
167 W (per channel at 3
ohms, 1 kHz)
Rated impedance 3 - 16 Ω
General
Power requirements 120 V AC, 60 Hz
Power consumption On: 50 W