Filter
Top Products
Additional Information
59
US
Sound
Video signals are only output
from the HDMI OUT jack when
connecting the HDMI OUT jack
and VIDEO OUT jack at the
same time.
• Set [Output Video Format] in [Screen Settings] to [Video] (page 50).
The dark area of the picture is too
dark/the bright area is too bright
or unnatural.
• Set [Picture Quality Mode] to [Standard] (default) (page 38).
The picture is not output
correctly.
• Check the [Output Video Format] settings in [Screen Settings] (page 50).
• If the analog and digital signals are output at the same time, set [BD/DVD-
ROM 1080/24p Output] in [Screen Settings] to [Off] (page 50).
• For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] settings in
[Screen Settings] (page 50).
Picture noise appears. • The disc is dirty or flawed.
• If the picture output from your system goes through your VCR to get to your
TV, the copy-protection signal applied to some BD/DVD programs could affect
picture quality. If you still experience problems even when you connect your
unit directly to your TV, try connecting your unit to the other input jacks.
Even though you set the aspect
ratio in [TV Type] of [Screen
Settings], the picture does not fill
the TV screen.
• The aspect ratio on the disc is fixed.
Color irregularity occurs on the
TV screen.
• If the speakers are used with a CRT-based TV or projector, install the speakers
at least 1.0 foot (0.3 meters) from the TV set.
• If the color irregularity persists, turn off the TV set once, then turn it on after 15
to 30 minutes.
• Make sure that no magnetic object (magnetic latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
Symptom Problems and solutions
There is no sound. • The speaker cord is not connected securely.
• Check the speaker settings (page 46).
• Fast forward or fast reverse is being performed. Press N to return to normal
play mode.
• Slow forward or freeze frame is being performed. Press N to return to normal
play mode.
No sound is output from the
HDMI OUT jack.
• Set [Audio Output] to [HDMI] (page 51).
The left and right sounds are
unbalanced or reversed.
• Check that the speaker and components are connected correctly and securely.
There is no sound from the
subwoofer.
• Check the speaker connections and settings (pages 18, 46).
Symptom Problems and solutions