Filter
Top Products
Sonance Symphony
®
Series
S623LCR
Home Theater Speaker
Specifications:
Sonance Symphony S623LCR
Tweeter: 1" (25mm) Silk dome, Ferrofluid-
cooled
Woofer: Two 6½" (165mm) Carbon fiber
cones, rubber surrounds
Frequency Response: 43Hz – 20kHz ±3dB
Impedance: 8 ohms nominal; 6 ohms minimum
Power Handling: 5 watts minimum;
135 watts maximum
Sensitivity: 92dB SPL (2.83V/1 meter)
Grille Material: Perforated Aluminum
Adjustments: ±3dB Tweeter Level
Dimensions (W x H x D): 16" x 8
1
/
8" x 3
7
/
8"
(407mm x 206mm x 98mm)
Cutout Dimensions (W x H): 14½" x 6¾" (368mm x 171mm)
Shipping Weight: 7 lbs (3.2kg) each
Features:
• Traditional dual woofer/single tweeter home
theater speaker configuration.
• Visually and sonically matches other Sonance
Symphony
®
series speaker models.
• Dual carbon fiber cone woofers produce deep,
powerful bass and provide high-output low-
distortion music and film dialog.
• Fits standard 16” on-center stud construction.
• Exclusive new FastMount
®
tabs hold the speaker in
the mounting hole during installation, allowing the
installer to let go of the speaker to pick-up tools or
other items.
• The Rotolock
®
mounting system makes installation
quick and easy.
• A three position tweeter adjustment switch lets
you balance the speaker’s high-frequency energy
to better complement the room’s setup and
acoustics.
• Removable IR plug accommodates a Sonance
OptiLinQ
®
SMR1 or SMR1P IR receiver, allowing
convenient front-of-the-room aiming for system IR
remote controls.
• Paintable perforated aluminum grille with built-in
scrim cloth.
S
ONANCE
S
YMPHONY
®
S623
LCR
S
PEAKER
The new Sonance Symphony
®
S623LCR home theater
speaker is a visual and sonic match for our best-selling
Sonance Symphony speaker line.
Incorporating the same drivers as the Symphony S623
T
and S623TR but in a traditional dual woofer/single
tweeter home theater speaker format, the S623
LCR makes
an ideal center-channel counterpart for any Symphony
series left and right channel speaker pair in small or
medium-sized home theater systems. And by using the
S623
LCR in all three front-channel positions (left, center
and right) and other Symphony series speakers as
surround channels, an exceptionally high-performance
home theater system can be assembled.
Installation is quick and easy thanks to the RotoLock
®
mounting system. Exclusive FastMount
®
tabs hold the
speaker in the mounting hole during installation, allowing
the installer to let go of it to pick-up tools or other items.
And the S623
LCR is designed to fit between standard 16”
on-center studs (the standard stud spacing in the USA).
The new Sonance S623
LCR is the perfect center-channel
match for any Sonance Symphony series speaker pair,
giving dealers and installers all the tools they need to
create exceptional home theater systems in a variety of
configurations.