Open as PDF
Cinema Select LCR Cabinet
Tweeter 1" (25mm) Silk dome, Ferrofluid-cooled,
Woofer 6½" (165mm) Carbon fiber cone, rubber
surround, shielded magnet
Frequency Response 80Hz – 20kHz ±3dB
Impedance 8 Ohms nominal; 5 Ohms minimum
Power Handling 5 watts minimum; 135 Watts maximum
Sensitivity 90dB SPL (2.83V 1 meter)
Baffle & Back Panel Material 1” MDF
Top,Bottom & Side Panel Material Laminate (½” MDF / ½” particle board)
Grille Material Black cloth
Adjustments ±3dB Tweeter level, boundary compensation
Dimensions (W x H x D) 7½" (190mm) x 11" (279mm) x 11½" (292mm)
Shipping Weight 18 lbs. (8.2 KG) each
Sonance Cinema Select
LCR Cabinet Speakers
Sonance Cinema Select® LCR Cabinet speakers bring true cinema
performance to those who have smaller theater rooms and can’t
use Sonance in-wall speakers. In fact, earning THX® Select
certification guarantees that in rooms up to 2,000 cubic feet,
Cinema Select LCR Cabinet speakers will reproduce film
soundtracks just as their filmmakers intended them to sound.
The new enclosure is a key to the Cinema Select LCR Cabinet
speaker’s superior performance. The 1”-thick MDF baffle and
back panels maintain ultra-high rigidity and banish resonances.
An exclusive laminate made-up of ½” MDF and ½” particle
board maximizes stiffness and reduces resonances in the top,
bottom and side panels.
Sonance Cinema Select LCR Cabinet speakers establish a
formidable standard of home entertainment performance that
makes them ideal for both multi-channel home theater and
• Cabinet design offers legendary Sonance quality and
performance to listeners who can’t use in-wall speakers.
Select certification guarantees cinema-quality
performance in rooms up to 2,000 ft
• Same drivers and voicing as Cinema Select in-wall speakers
allows mix-and-match between in-wall and cabinet versions
while maintaining character and quality of ‘Sonance sound’.
• Tweeter acoustic back chamber widens and smoothes
• Ultra-rigid 1” MDF baffle and back panels minimize resonances.
• Cabinet top, bottom & sides made from an exclusive laminate
of ½” MDF and ½” particle board, for superior stiffness and
• Tweeter level control and boundary compensation control
maximize performance in a variety of installations.
• Large connection terminals accept up to 12AWG speaker wire.
• Compact size increases installation options.
212 Avenida Fabricante
San Clemente,CA 92672-7531 USA
(800) 582-7777 or (949) 492-7777
FAX: (949) 361-5151
Technical Support: (800) 582-0772
Sonance Cinema Select
LCR Cabinet Speaker
©2004 Sonance,All Rights Reserved.Sonance, Sonance Cinema Select and RotoLock are trademarks of Sonance. THX and THX Select are trademarks or registered trademarks of THX, LTD.
All specifications are subject to change without notice. 04/05