Snell Acoustics AMC 6030 Speaker User Manual


 
AMC 6030
AN IN-CEILING VERSION OF SNELL’S MOST SUCCESSFUL LCR
To achieve the performance capabilities of a freestanding monitor, the flush-mount
design used in the AMC 6030 overcomes three major factors that limited in-ceiling
speaker performance. First, to insure predictable response, regardless of placement
or construction type, the dual 5 1/4-inch woofers and low resonance tweeter are
placed inside a sealed, aluminum enclosure, which defines bass response, just like a
conventional loudspeaker’s enclosure, and reduces sound transfer through the ceil-
ing cavity to other rooms. Second, specific materials are used to control resonance.
The drivers are mounted to a well-braced and damped aluminum baffle, to enhance
bass/midrange clarity and deaden wall resonance. The baffle is then welded to the
well-damped, heavy gauge aluminum enclosure. Third, since flush mount speakers
fail to produce a proper soundstage, the driver plane steers energy from above the
ceiling line toward the listening area, at a 45-degree angle. The adjacent surfaces
are lined with sound deadening materials to prevent cabinet reflections from caus-
ing distortion. The result is open and clear sound that appears to be coming from
the front instead of overhead. These attributes combine for a music or theater
experience unheard of from an in-ceiling speaker. Designed by Snell’s chief engineer
Joe D’Appolito, the AMC 6030 shares drivers and crossover from Snell’s in-room
LCR7, in-wall AMC 830 and in-cabinet ICS 1030, re-engineered for the boundary
and placement of a ceiling mount enclosure. The benefit is a quartet of models that
can be mixed and matched to deliver the best music and theater experience possible
while blending in to any décor or room condition.
AMC Series
AMC 6030
Design Infinite Baffle, Back-Boxed, In-Cieling LCR
Frequency Response
70Hz-20kHz+3dB
Sensitivity 89dB
Nominal Impedance 4 Ohms
Crossover Frequency 2kHz
Recommended Amplifier Power 50-250 Watts
Maximum Output (per pair) 110dB
Placement 2" x 10" Joist Ceiling
Drive Units Tweeter: 1-inch SEAS Silk Dome
Woofer: Two 5.25-inch Poly, 5mm Excursion
Input Connection Spring Loaded, Push Post, Accepts 12 Gauge Wire
Dimensions Finish: Height: 15.6-inches
Width: 15.6-inches
Depth: 8.25-inches
Rough Opening: Height: 14.38-inches
Width: 14.38-inches
Mounting System 8 "dog-Leg" clamps
Finishes Cabinet: White
Grille: White, Perforated Metal 53% Open
Manufactured by Snell Acoustics, PO 3717, Peabody MA 01960
www.snellacoustics.com 978-538-6262 978-538-6266fax