Filter
Top Products
E-8
EN
■ Pairing Bluetooth devices
Bluetooth devices need to be initially paired rst before they
can exchange data. Once paired, it is not necessary to pair
them again unless:
● pairing is made with more than 8 devices. Pairing can
only be made one device at a time. This unit can be
paired to a maximum of 8 devices. If subsequent device
is paired, the oldest device paired, will be deleted and
replaced with the new one.
● this unit is reset. All pairing information is deleted when
unit is reset.
● pairing information is deleted while re-pairing, etc.
Indicators:
Indicator Condition Bluetooth status
Blinks
In waiting or pairing mode
Lights up
Connected
No indication
Unconnected
However, the indication status is not displayed during
Bluetooth stand-by mode.
■ Pairing with other Bluetooth source devices
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button (main unit) repeatedly or
Bluetooth button (remote control) to select Bluetooth
function. “Bluetooth” appears on the display.
3 Press and hold the PAIRING button for 3 seconds or
more. “Start Pairing” appears on the display. The unit
is now in pairing mode and is ready to be paired with
other Bluetooth source device.
4 Perform pairing procedure on the source device to
detect this unit. “SHARP XL-HF202” will appear in
the detected devices list (if available) in the source
device. (Refer the source device operating manual for
details).
Notes:
● Place the devices to be paired within 1 meter (3
feet) of each other when pairing.
● Some source devices are unable to display lists of
detected devices. To pair this unit with the source
device, refer to the source device operating man-
ual for details.
5 Select “SHARP XL-HF202” from the source list. If
Passcode* is required, enter “0000”.
* Passcode may be called PIN Code, Passkey, PIN
number or Password.
6 “Pair Complete” and then “Connected” appears on the
display once the unit is successfully paired with the
source device. (Pairing information is now memorised
in the unit.) Some audio source devices may connect
with the unit automatically after pairing is completed,
otherwise follow the instructions in the source device
operating manual to start connection.
7 Press the play button on main unit, remote control or
source device to start Bluetooth connection.
Notes:
● If a device such as microwave oven, wireless LAN card,
Bluetooth device or any other device that uses the
same 2.4 GHz frequency near the system some sound
interruption may be heard.
● The transmission distance of the wireless signal be-
tween the device and the main unit is about 10 m (32 ‘),
but may vary depending on your operating environment.
If a steel concrete or metallic wall is between the device
and the main unit, the system may not operate at all,
because the wireless signal cannot penetrate metal.
● If this unit or the source device is turned off before Blue-
tooth connection is completed, pairing will not be com-
pleted and the pairing information will not be memo-
rised. Repeat step 1 onwards to start pairing again.
● To pair with other devices, repeat steps 1 - 5 for each
device. This unit can be paired to a maximum of 8 de-
vices. If subsequent device is paired, the oldest device
paired, will be deleted and replaced with the new one.
● Once a device is ousted or deleted from the pairing list,
the pairing information for the device is also deleted. To
listen to the sound from the device again, it needs to be
re-paired. Perform steps 1 - 5 to pair the device again.
■ Listening to the sound
Check that:
● The source device Bluetooth functionality is ON.
● Pairing of this unit and the source device is completed.
● Unit is in connected mode.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button to select Bluetooth func-
tion.
3 Start the Bluetooth connection from the Bluetooth
stereo audio source device.
4 Press the Bluetooth / button.
Notes:
● For various Bluetooth operations, refer “NFC con-
nection for audio playback” on page 7.
● If the source device has an extra bass function or
equalizer function, set them to off to avoid sound
distortion.
Notes:
● Make the Bluetooth connection again if the source device
is not turned on, or its Bluetooth functionality is off or is in
sleep mode.
■ To disconnect the Bluetooth device
Perform any of the followings.
– Disconnect the Bluetooth connection on the audio source
device. Refer the operating manual supplied with the
device.
– Turn off the Bluetooth stereo audio source device.
– Turn off this unit.
Note:
The volume of this unit may not be controlled as intended
depending on the device.
■ Auto power on
During Bluetooth stand-by mode, when music is played from
your device, the unit will automatically power on when the
Bluetooth connection has been set up between the main unit
and your device and they remain connected.
Note:
This function is not applicable during Demonstration mode
off.
Listening to Bluetooth enabled devices (continued)