Filter
Top Products
ENGLISH
01/4/26 99secl_E_6.fm
E-45
References
-Troubleshooting-
Troubleshooting
Many potential "problems" can be resolved by the owner without calling a service technician. If something seems to be wrong
with this product, check the following before calling your authorised SHARP dealer or service centre.
The unit does not turn on.
z
Is the AC adaptor disconnected?
z
Is the battery exhausted?
z
Is the unit in the hold mode?
z
Has condensation formed inside the unit?
z
Is the unit being influenced by mechanical shock or by
static electricity?
No sound is heard from the headphones.
z
Is the volume set too low?
z
Is the remote control or the headphones plugged in?
z
Are you trying to play a MiniDisc with data on it instead
of a MiniDisc containing music?
When the operation buttons are pressed, the unit does
not respond.
z
Is the unit in the hold mode?
z
Is the battery exhausted?
z
Is the remote control unit plug or the headphones plug
inserted firmly?
Some sounds are skipped.
z
Is the battery exhausted?
z
Is the unit being subjected to excessive vibration?
The MiniDisc cannot be ejected.
z
Has the track number or character information been
written on the disc yet?
z
Is the unit in the recording or editing mode?
Recording and editing are impossible.
z
Is the MiniDisc protected against accidental erasure?
z
Is the unit connected properly to the other equipment?
z
Is the AC adaptor unplugged or did a power failure oc-
cur whilst recording or editing?
z
Is the unit in the hold mode?
z
Is an optical signal being output from the stereo sys-
tem? Read the operation manual for the stereo sys-
tem.