Filter
Top Products
1
Accessories
2
Installing the glass and the glass protector
TINSEA270AWZZ
08G R MW 1
MODEL
AN-GR
500
H
HOME CINEMA RACK SYSTEM
This quick Start Guide will help you to correctly install and operate your system.
1
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.aspx
Customers without internet access may
telephone 0870 787 4837 during office hours (or
(01) 843 4711 if telephoning from Ireland).
Top glass x 1 Bottom glass x 1
Remote control x 1
Adjustable nylon band x 3
Glass protector x 4AC power lead x 1
FM aerial x 1
"AA" size battery
(UM/SUM-3, R6, HP-7 or similar)
x 2
1. Fix the glass protector to the top glass at each corner.
Make sure the "TEMPERED" sticker on top of the glass
is facing up.
TEMPERED
TEMPERED
TOP VIEW
Step 1 Step 2
BOTTOM VIEW
Step 1
Step 2
“TEMPERED” sticker
2. Place the top glass on top of the frame.
Make sure all the glass protector guide is fitting to the frame hole.
TEMPERED
TEMPERED
Glass protector
Subwoofer box
Top glass
Frame hole for
the glass protector
to fit in.
Bottom
glass
“TEMPERED” sticker
“TEMPERED”
sticker
3. Place the bottom glass on top of the subwoofer box.
Make sure the “TEMPERED” sticker on top of the glass is facing
up.
Notes:
It is advisable for the top glass to be carried by 2 persons.
Top glass with sticker on its surface, must face upwards.
Metal frame must not be removed to ensure safety.
The maximum load for the top glass on the unit is 100 kg.
The glasses are made of reinforced glass, but dropping pointed
objects on them or strongly hitting the surface may cause them to
break.
Top and bottom glass are not fastened to the unit. Always take
care when transporting it, otherwise these parts may fall off and
there is a risk of damage and injury.