Sennheiser SR 300 IEM G3 Satellite Radio User Manual


 
Using the transmitter
18
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item. If the
lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the transmitter:
The lock mode icon flashes prior to the lock mode being activated again.
Activating/deactivating the RF signal
To deactivate the RF signal:
To activate the RF signal:
̈ Press the jog dial.
Locked” appears on the display panel.
̈ Turn the jog dial.
Unlock?” appears on the display panel.
̈ Press the jog dial.
The lock mode is temporarily deactivated:
When you are in the operating menu
The lock mode remains deactivated until you exit the operating menu.
When the standard display is shown
The lock mode is automatically activated after 10 seconds.
̈ When the standard display is shown on the display panel, press the STANDBY
button.
RF Mute On?” appears on the display panel.
̈ Press the jog dial.
The RF signal is deactivated. “RF Mute” flashes in alternation with the standard
display and the display is backlight in red.
̈ Press the STANDBY button.
RF Mute Off?” appears on the display panel.
̈ Press the jog dial.
The RF signal is activated and the display backlighting changes from red to
orange.
You can also deactivate the RF signal on switch-on. For more information, refer to
the chapter “Switching the transmitter on/off” on page 13.
PEAK
-10
0
-20
-30
-40
PEAK
-10
0
-20
-30
-40
516.000
ew300IEM
B.Ch: 1 1
EQ
Standard -18dB
MHz