Sennheiser SK 100 Satellite Radio User Manual


 
24
Adjusting settings via the operating menu
̈ Set the desired channel.
̈ Set the desired frequency.
Setting the mode for the MUTE switch – “Mute Mode”
For information on how to use the MUTE switch, refer to
page 13.
Emulating guitar cables – “Cable Emulation”
Via the “Cable Emulation” menu item, you can emulate
4 different guitar cable capacities.
Activating/deactivating the pilot tone transmission –
“Pilot Tone”
̈ Press the SET button.
The frequency selection appears.
̈ Press the SET button.
Your settings are stored.
You are back to the operating menu.
Mode Function
AF On/Off When the switch is in the MUTE posi-
tion, no audio signal is transmitted.
RF On/Off When the switch is in the MUTE posi-
tion, the RF signal is deactivated.
Disabled The muting function is deactivated.
SET
SET
SET
543.200 MHz
Tune
B.Ch: U. 1 B.Ch: U. 1
Tune
Call up “Tune”
(special function)
Advanced
Menu
Tune
“Stored”
543.200 MHz
Select the channel;
store the setting
Set the
frequency
543.200 MHz
Advanced
Menu
Mute Mode
Mute Mode
Mute Mode
RF On/OffAF On/Off
AF On/Off
“Stored”
Call up
“Mute Mode”
Select the desired
setting
Store the setting
SET
SET
Cable Emulation
Advanced
Menu
Cable Emulation
Medium
Medium
Cable Emulation
High
“Stored”
Select the desired
setting
Store the settingCall up “Cable
Emulation”
SET
SET
Name
Advanced
Menu
Pilot Tone
Active
Active
Pilot Tone
Inactive
Pilot Tone
“Stored”
Call up
“Pilot Tone”
Select the desired
setting
Store the setting
SET
SET