Sennheiser SK 100 Satellite Radio User Manual


 
23
Adjusting settings via the operating menu
The extended menu “Advanced Menu
Setting transmission frequencies for the frequency bank
“U” – “Tune”
Via the “Tune” menu item, you can set a transmission
frequency to be stored in the current channel or you can
select a different channel in the frequency bank “U” and
assign this channel a transmission frequency.
Setting a transmission frequency for the current channel
̈ Set the desired frequency.
Selecting a channel and assigning this channel a
frequency
When you have selected one of the system banks
and then select the “Tune” menu, the bodypack
transmitter automatically switches to channel 1 of
the frequency bank “U”. In this case, “U.1” briefly
appears on the display panel.
Upon delivery, the channels of the frequency bank
U” are not assigned a transmission frequency.
When you are in the “Tune” menu item, the
RF signal is deactivated.
It is vital to observe the notes on frequency
selection on page 26.
̈ Press the rocker button until the “Tune” menu
item appears.
̈ Press the SET button.
The frequency selection appears.
̈ Press the SET button.
Your settings are stored.
You are back to the operating menu.
̈ Press the rocker button until the “Tune” menu
item appears.
̈ Keep the SET button pressed until the channel
selection appears.
543.200 MHz
Tune
544.200 MHz
B.Ch: U. 1 B.Ch: U. 1
Tune
Advanced
Menu
Tune
“Stored”
543.200 MHz
Select the MHz
value and confirm
Select the kHz
value; store the
setting
Call up “Tune”
SET
SET
SET