Filter
Top Products
6
Connecting the antenna
The AC 3000 active transmitter combiner can be used with
either the A 2003 UHF directional antenna or the A 1031 U
omni-directional antenna. The antenna transmits the sig-
nals of all connected transmitters. The signals are combined
onto the antenna output with no distribution attenuation.
̈ Connect the antenna to the antenna output ANT ´.
Note:
Each AC 3000 requires its own antenna! Several
AC 3000s cannot be daisy-chained!
Connecting the transmitters
You can connect up to eight SR 3054 transmitters or up to
four SR 3056 twin transmitters to the AC 3000.
̈ Use 50-Ohm BNC cables to connect the transmitters to
the RF inputs RF IN 1 to RF IN 8 ».
Connecting the mains cable
̈ Connect the mains cable to the IEC mains socket ᕦ and
to the mains.
Note:
The AC 3000 can be connected to any mains power
supply with 100 V to 240 V AC (50 to 60 Hz).
´
ᕣ ᕣᕣ
ᕣ
ᕦ
8
AC3000_093908_0406_Sp6.book Seite 6 Donnerstag, 6. April 2006 1:59 13