Samsung MXHS9000 Stereo Receiver User Manual


 
Functions
3. Find a station by:
•
Pressing and holding the TUNING/
ALBUM
,
or
.
button on the remote
control to automatically search for
broadcasting stations.
4. Press the MO/ST button to switch
between stereo and mono.
•
In a poor reception area, select MONO
for a clear, interference-free broadcast.
•
This applies only when listening to an
FM station.
5. If you do not want to store the radio
station found, go back to Step 3 and
search for another station.
Otherwise:
a. Press the
¬
button.
b. Or, press the TUNING/ALBUM button
on the remote control to select a
program number in the PRESET mode.
c. Press the
¬
button to save the preset.
6. To store other radio frequencies, repeat
Steps 3 to 5.
|
NOTES
|
In Tuner mode
-
In the Manual mode, you can use the
1
or
2
button or the DJ JOG control.
-
In the Preset mode, you can use the
1
or
2
button or the DJ JOG control
on the product to search a stored radio
station.
Selecting a Stored Station
To listen to a stored station, follow these steps:
1. Select FM by pressing the TUNER/AUX
button on the product or remote control.
2. Press the TUNING MODE button on the
remote control until “PRESET” is displayed.
3. Press the
1
,
2
buttons on the main unit
or the TUNING/ALBUM
,
,
.
buttons
on the remote control to select a preset
number.
or
Turn the DJ JOG control left or right on
the main unit to select the stored station.
Timer Function
Setting the Clock
For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
1. Press the TIMER SET button on the remote
control twice. "CLOCK SET" is displayed.
2. Press the
¬
button on the remote
control. The hour flashes.
•
To increase the hours: TUNING/ALBUM
,
•
To decrease the hours: TUNING/ALBUM
.
3. When the correct hour is displayed, press
the
¬
button, and then the minutes
flash.
•
To increase the minutes: TUNING/
ALBUM
,
•
To decrease the minutes: TUNING/
ALBUM
.
4. When the correct minute is displayed,
press the
¬
button. "TIMER PLAY SET"
appears in the display.
Setting the Timer
The timer enables you to set the product to
switch on or off at specific times automatically.
•
Before setting the timer, check that the
current time is correct.
•
For each step, you have a few seconds to set
the required options. If you exceed this time,
you must start again.
•
If you no longer want the product to be
switched on or off automatically, you must
cancel the timer by pressing the TIMER
ON/OFF button.
Example: You want to wake up to
music every morning.
1. Press the TIMER SET button until TIMER
PLAY SET is displayed.
20 English