Filter
Top Products
PRO
PRODUCT SPECIFICATION SHEET
AMPLIFIERS
TYPE:
POWER
AMPLIFIERS
PRODUCT DESCRIPTION
SERVO 200
POWER AMPLIFIER
SERIES
CATEGORY
SERVO AMPLIFIERS
FRONT PANEL
BACK PANEL
GENERAL DESCRIPTION
The Samson Servo 200 stereo power amplifier has
been designed to provide robust, clean output with
low distortion and wide dynamic range, along with
the dependability demanded by the most professional
audio engineers and installers.
The convenient 2 rack-space design is compact,
and yet there’s plenty of power available. With 2 x
66 Watts at 8Ω, 2 x 100 Watts at 4Ω, over the full
frequency spectrum, from 10 Hz to 55 kHz.
For mono applications, a Bridge mode links both
channels of the amplifiers, thus providing even more
single channel power, with a power rating of 200 watts
into an 8 Ohm load.
Input connections are available for both unbalanced
RCA connections and balanced 1/4-inch TRS
connections . For the outputs, the Servo 200
amplifier provides standard 5-way binding posts and
1/4” phone jacks. Front-panel controls and displays
include a power switch with LED indicator, as well as
independent left and right channel input level controls.
To help you set the correct operating levels, the Servo
200 amplifier includes front panel Signal, Peak and
Protection LED indicators. There's also a ten-segment
VU meter to help you set a good operating level.
Like all serious power amplifiers, the Servo 200’s
internal electronics are based around a serious power-
core, with an over-sized toroidal transformer and large
extruded heat sink. To keep the Servo 200 amplifier
running cool, the design employs twin internal wind
tunnels with forced-air cooling via two temperature-sensitive,
variable speed fans, which greatly reduce the chance of
thermal and overheating problems. Multi-stage protection for
power-up, over-heating, over-current, short circuit, low output
impedance and DC voltage, assures high reliability under the
most demanding situations.
The Servo 200 amp is road tough with its all steel chassis and
19-inch rack mount design. The Servo 200 amplifier is ready
for a life on the road, or to make its home in a fixed installation.
Optimized for live sound venues, houses of worship, commercial
installations, and for driving small and medium-sized live PA
systems, the Servo 200 amplifier will deliver reliable power
from gig-to-gig, venue-to-venue and day-to-night.
FEATURES
> Power to spare - 2 x 66 Watts at 8Ω, 2 x 100 Watts at 4Ω
> For mono applications, a Bridge mode links both channels
of the amplifiers, thus providing even more power, with a
power rating of 200 watts driving an 8 Ohm load.
> Clean, crisp sound - Impressive audio specifications such
as 0.04% THD, dynamic range of 105 dB, crosstalk of 80
dB, and frequency response of 10 Hz to 55 kHz guarantee
ultra-clean sound quality.
> Independent input level controls for each channel allow
precision adjustments.
> 10 segment LED signal indicators for each channel
continuously display power output levels and allow you to
correct for overloading (clipping) conditions.
continues»
©2006 Samson v1.0 5/06