Filter
Top Products
RPQ160 Parametric Equalizer
The RPQ160 is a four-band parametric equalizer for the professional audio installation and
music market. The unit is housed in a steel painted 1U rack space chassis, has an internal
power supply, and is designed to withstand the rigors of road use.
Each frequency band has a variable Frequency select control which adjusts the frequency
center, a Width (Q) control which varies the shape of the equalization curve, and a +/- 15 dB
Level control. Additional frequency control has been provided with variable High and Low
pass shelving filters. An overall Level control, a Bypass switch, and a Power LED round out
the front panel.
Since equalization is used on virtually every type of audio signal and in many various applica-
tions, the RPQ160 has RCA, 1/4" and XLR inputs and outputs provided on the rear panel.
A parametric equalizer, unlike conventional graphic equalizers, provides for the precise con-
trol over the frequency selection, band width and levels. The RPQ160 is a powerful tool when
used for room equalization, sound reinforcement, or home or studio recording applications.
FEATURES:
Four bands of parametric equalization
+/- 15 dB of Boost/Cut for each frequency
RCA, 1/4" and XLR inputs and outputs
Adjustable high and low shelving filters
"T" Filters, which avoid the complexity and distortion of state-variable filters
ROLLS Coporation
5143 South Main Street, Salt Lake City, UT, 84107
(801) 263-9053 FAX (801) 263-9068
rolls@rolls.com • www.rolls.com
20
40k
20k
40
100
320
640
4k
12k
Frequency (Hz)
HIGH SHELF SWEEP DIAGRAM
O dB
Set at 30 khz
Set at 1 khz
10
16k
12k
20
40
80
160
320
640
Frequency (Hz)
Set at 16Hz
Set at 500 Hz
LOW SHELF SWEEP DIAGRAM
O dB
20k
50
10k
6k
100
200
600
1k
2k
Frequency (Hz)
20k
Amplitude, 5 dB/division
5
10
15
20
-5
-10
-15
-20
The two shelving filters are designed to tai-
lor the frequency response of the signal; the
Low Shelf cuts the frequencies 3 dB at the
control's indicated setting and rolls off be-
low, and the High Shelf cuts the frequencies
3dB at the indicated setting and rolls off
above.
The Low Shelf Sweep Diagram shows the re-
sponse curve of the Low Shelf filter at its
minimum and maximum setting.
The High Shelf Sweep Diagram shows the
response curve of the High Shelf filter at its
minimum and maximum setting.
Shown to the left is a typical symmetrical
response curve of a swept parametric band
filter with the Frequency control set at 1 kHz,
the Level set at +15 and -15 dB, and the Oc-
tave control set at .3, .5, 1, and 3. These
curves remain consistent over the frequency
spectrum, they simply shift to whatever fre-
quency setting is indicated by the Frequency
control.
CLIP
HIGH SHELF
1
KHZ
1.5
4
2
6
10
30
16
20
30
50 100
LOW SHELF
500
400
200
HZ
0
+12
LEVEL
-12
WIDTH LEVEL
3.3
0
+15-15
HZ
FREQ
+15-15
HZ
FREQ
WIDTH LEVEL
0
+15-15
HZ
FREQ
WIDTH
LEVEL
0
+15-15
HZ
PWR
150 3k
300
800
1.1k
1.8k
300
800
2.1k
3.3k
7k
10k
600
2k
4k
6k
12k
20k
ACTIVE
0
FREQ
70
200
400
600
900
1.5k
100
166 400
900
WIDTH
OCT
3.3
OCT
3.3
OCT
3.3
OCT
dB dB dB dB dB
120 VAC
50/60 Hz 15 VA
MADE IN U.S.A.
CAUTION
RISQUE DE CHOC - NE PAS ENLEVER
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SERIAL NUMBER
WARNING:
DO NOT EXPOSE THIS EQUIPMENT TO RAIN
OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT NOT REMOVE BACK. NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
INPUT
OUTPUT
NRTL/C