Filter
Top Products
REQ313 GR APHIC EQUALIZER
ROLLS CORP.
5968 South 350 West
Salt Lake City, UT 84107
(801) 263-9053 • (801) 263-9068
www.rolls.com
CONSTANT Q
CORPORATION
CORPORATION
MODEL REQ313
MODEL REQ313
REQ313
31 BAND
GRAPHIC
EQUALIZER
WARNING:
WARNING:
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE BACK.
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE BACK.
NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO
NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
QUALIFIED SERVICE PERSONNEL.
RISQUE DE CHOC - NE PAS ENLEVER
RISQUE DE CHOC - NE PAS ENLEVER
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The ROLLS REQ313 graphic equalizer is intended for room equalizing or sound shaping and the approximate fre-
quency response curve can be seen graphically by the settings of the frequency controls. Recording and broadcasting
studios, sound contractors and musicians will appreciate the low noise, straightforward design, and versatile signal
control of the REQ series.
The equalization filters in the REQ313 are constant bandwidth
(constant Q). The bandwidth of each individual filter is narrow
enough to prevent unwarranted interaction between filters, yet
wide enough to produce exactly the type of correction curve
demanded by even the most unusual acoustic surroundings.
FEATURES
• 31 Bands of constant Q equalization
• XLR and 1/4” input and output
• Low cut and High cut filters
• Passive bypass
• 1 Year Warranty
SPECIFICATIONS
Equalizer
Bands: 31
Frequency Response: 20Hz - 20kHz
Accuracy: 5% Center Frequency
Range: +6dB or +12 dB (Switch selectable)
Inputs
Type: Active Balanced/Unbalanced
Connectors: XLR, 1/4” TRS
Impedance: 12k Ohms
Maximum Level +22 dB (Balanced),
+15dB (Unbalanced)
Outputs
Type: Electronically Balanced
Connectors: XLR, 1/4” TRS
Impedance: 600 Ohms
Maximum Level: +22 dB (Balanced),
+15dB (Unbalanced)
RFI Filters: Yes
Passive Bypass Switches: Yes
Overload LED Threshold: 3dB below clipping
Low Cut Filter: 10 - 250Hz, 12dB/Oct.
Frequency Response: 20Hz - 20kHz, +0.5dB
THD + Noise: 0.01% (20Hz - 40kHz)
S/N Ratio: 110dB below Max level (A weighted)
Equivalent Input Noise: -95dB (20kHz noise bandwidth)
Dimensions: 3.5”H x 19”W x 8.5”D