RBH Sound MC-616 Speaker User Manual


  Open as PDF
of 8
 
Copyright
©
2006, RBH Sound. All rights reserved.
RBH Sound
has been designing, engineering
and building loudspeaker systems since 1976. Our
goal is to provide superior acoustic reproduction at sensible prices.
RBH Sound was among the first audio pioneers to see the need for in-wall
speaker systems that were great sounding and cost effective. Not content to just
create another in-wall/in-ceiling speaker that pumps out decent background music, RBH set
out to create an entire series of high-quality, great sounding in-wall/in-ceiling speakers that meet
not only our own high standards, but also our customers. The following high quality components have been
selected by our engineers for use in our in-wall speaker systems. Swivel Neodymium Tweeters: This tweeter can
be angled up to 30° off axis to provide accurate imaging anywhere in your room. If you change your listening position,
the accurate sonic reproduction you deserve can be maintained by changing the angle of the tweeter. This compact
magnet is made from Neodymium, a rare earth metal with the strongest magnetic flux density of any magnetic alloy.
Acoustic Lens: By dispersing the high frequency energy, the Acoustic Lens improves the off-axis response of dome tweeters.
This refocusing produces smooth high frequency reproduction over a larger listening area. Paintable Grilles: If you desire to completely
conceal your in-wall speakers, the ABS frame and metal grille can be painted to match the wall. This will blend the speaker into your
ceiling or wall and conceal the source of your musical pleasures. Graphite Composite Woofers: The rigid structure and uniform density
of our graphite woofers provide for accurate mid-range reproduction and extended low frequency response. Fiberglass /Aluminum Cones:
Fiberglass cones are very light and rigid providing clean, precise mid-range response. Aluminum is the ultimate rigid cone material, providing
a non-compressing piston area for unparalleled bass response. RBH speaker products feature voice coil formers manufactured from an aerospace
material capable of handling very high temperatures, while increasing power handling and lowering distortion. Silk Dome Tweeters: The fine
mesh structure of Silk domes ensures smooth and natural reproduction of vocal and musical passages without any harshness. Aluminum Dome
Tweeters: Aluminum is one of the strongest and lightest metals known to man. Aluminum domes have excellent dispersion off-axis for room-filling
high frequency accuracy. Mylar Capacitors: RBH uses Mylar capacitors in critical crossover components. Mylar is a dielectric polymer which allows
clean transfer of high frequency signals. Mylar capacitors minimize distortion and produce uncolored high frequency response. Protection Devices:
We want your speakers to last so we have integrated the best current interrupt devices available into our crossover circuitry. Current interrupt
devices operate faster than fuses or thermistors and do not require replacement. This self-resetting protection device helps ensure safe
operation of RBH speaker systems for years to come.
Hear what the fusion of premium parts and superior design can do for your ears. Hear the difference today.
The sonic caliber of this speaker can be seen as well as
heard. The gold color of its fiberglass cone foreshadows
the incredible sonic performance delivered to all in its
path. The rigid 8-inch woofer provides elite bass impact
and the 1-inch tweeter produces pure sonic reproduction.
M o d e l T K-8
8” (203mm) Fiberglass Woofer
1” (25mm) Aluminum Dome Swivel Tweeter w/Acoustic Lens
2nd Order Crossover
The result of the perfect integration of fiberglass and
aluminum. The TK-6 provides high-power handling capacity
with uncompressed audio purist sound. The TK-6 represents
bulletproof performance in a compact design.
M o d e l T K-6
6½” (165mm) Fiberglass Woofer
1” (25mm) Aluminum Dome Swivel Tweeter w/Acoustic Lens
2nd Order Crossover
RBH Sound
Layton, Utah • USA
800-543-2205
www.rbhsound.com
Optional rear enclosure available.
The bulletproof performance of the TK-6, housed in
the same size frame as the A-615. The TK-615 provides a
generous upgrade sound for the performance hungry and
the budget conscious.
M o d e l T K-615
6½” (165mm) Fiberglass Woofer
¾” (19mm) Aluminum Dome Swivel Tweeter w/Acoustic Lens
2nd Order Crossover
Optimized for in-ceiling installation, the TK-815 provides the
same performance as the TK-8. The rigid 8-inch fiberglass cone
provides excellent bass performance and refined midrange
response. Combined with an aluminum-dome 1-inch tweeter,
the TK-815 presents a refined step-up solution.
M o d e l T K-815
8” (203mm) Fiberglass Woofer
1” (25mm) Aluminum Dome Swivel Tweeter w/Acoustic Lens
2nd Order Crossover
Architectural Products
A-610 Crossover TK-6 Crossover MC-6 Crossover
Technical Specifications
A-504D
In-ceIlIng
D
ual channel
5¼”(133mm)
P
olygraPhIte
1”(25mm)
m
ylar cone
n/a
n/a
n/a
8 o
hms x 2
60 h
z to
14,000 hz
1
50 Watts
88 Db
2
8¼” DIameter
2½” DePth
6¾” DIameter
2 lbs. each
A-505R
In-ceIlIng 2-Way
5¼”(133mm)
P
olygraPhIte
¾”(19mm)
m
ylar Dome
6
Db/octave
3000 hz.
n/a
8 o
hms
60 hz to
20,000 hz
1
60 Watts
88 Db
2
8¼” DIameter
2½” DePth
6¾” DIameter
2¼ lbs. each
A-506
In-ceIlIng 2-Way
synchronous
5¼”(133mm)
P
olygraPhIte
¾”(19mm)
m
ylar Dome
synchronous
6 Db/octave
3000 hz.
n/a
8 o
hms
60 hz to
20,000 hz
1
60 Watts
88 Db
2
8¼” DIameter
3¾” DePth
6¾” DIameter
2¼ lbs. each
A-509
In-Wall 2-Way
5¼”(133mm)
P
olygraPhIte
1”(25mm)
s
Ilk Dome WIth
acoustIc lens
6 Db/octave
3000 hz.
n/a
8 o
hms
60 hz to
20,000 hz
1
60 Watts
88 Db
2
7½” WIDth
11” heIght
2¾” DePth
6½” WIDth
9¾” heIght
3 lbs. each
A-610
In-Wall 2-Way
6½”(165mm)
P
olygraPhIte
1”(25mm)
s
Ilk Dome WIth
acoustIc lens
12 Db/octave
2800 hz.
y
es
8 ohms
55 hz to
20,000 hz
1
80 Watts
90 Db
2
8¾” WIDth
12” heIght
3” DePth
7½” WIDth
11” heIght
3¼ lbs. each
A-615
In-ceIlIng 2-Way
6½”(165mm)
P
olygraPhIte
¾”(19mm)
s
Ilk Dome WIth
acoustIc lens
12 Db/octave
3000 hz.
n/a
8 o
hms
55 hz to
20,000 hz
1
80 Watts
90 Db
2
9¼” DIameter
4½” DePth
8” DIameter
3½ lbs. each
A-615D
In-ceIlIng 2-Way
Dual channel
6½”(165mm)
P
olygraPhIte
Dual ¾”(19mm)
s
Ilk Dome WIth
acoustIc lens
12 Db/octave
3000 hz.
y
es
8 ohms x 2
55 h
z to
20,000 hz
1
80 Watts
90 Db
2
9¼” DIameter
4” DePth
8” DIameter
3½ lbs. each
A-615-70
In-ceIlIng 2-Way
70 volt reaDy
6½”(165mm)
P
olygraPhIte
¾”(19mm)
s
Ilk Dome WIth
acoustIc lens
12 Db/octave
3000 hz.
y
es
8 ohms/70 volt
55 hz to
20,000 hz
1
80 Watts
90 Db
2
10¼” DIameter
9½” DePth
8¾” DIameter
8 lbs. each
Model
system tyPe
Woofer DIameter
Woofer cone
tWeeter
crossover
crossover frequency
tWeeter ProtectIon
system ImPeDance
frequency range
PoWer
sensItIvIty
fInIsheD DImensIons
cutout DImensIons
WeIght
A-810
In-Wall 2-Way
8”(203mm)
P
olygraPhIte
1”(25mm)
s
Ilk Dome WIth
acoustIc lens
12 Db/octave
2500 hz.
y
es
8 ohms
50 hz to
20,000 hz
1
110 Watts
90 Db
2
10¼” WIDth
14¼” heIght
3¾” DePth
9” WIDth
12¾” heIght
5 lbs. each
A-815
In-ceIlIng 2-Way
8”(203mm)
P
olygraPhIte
1”(25mm)
s
Ilk Dome WIth
acoustIc lens
12 Db/octave
3000 hz.
n/a
8 o
hms
50 hz to
20,000 hz
1
100 Watts
90 Db
2
10¾” DIameter
4¾” DePth
9¾” DIameter
5 lbs. each
MC-6DB
In-Wall 2-Way
surrounD
6½”(165mm)
a
lumInum
Dual ¾”(19mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
3000 hz.
y
es
8 ohms
50 hz to
20,000 hz
1
120 Watts
88 Db
2
8¾” WIDth
12” heIght
3½” DePth
7½” WIDth
11” heIght
5½ lbs. each
MC-615
In-ceIlIng 2-Way
6½”(165mm)
a
lumInum
¾”(19mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
3000 hz.
y
es
8 ohms
50 hz to
20,000 hz
1
120 Watts
88 Db
2
9¼” DIameter
4½” DePth
8” DIameter
4 lbs. each
MC-83
In-Wall 3-Way
8”(203mm)
a
lumInum
1”(25mm) &
2½”(64
mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
2500 hz.
yes
8 ohms
45 hz to
20,000 hz
1
150 Watts
88 Db
2
10¼” WIDth
14¼” heIght
3¾” DePth
9” WIDth
12¾” heIght
6½ lbs. each
MC-815
In-ceIlIng 2-Way
8”(203mm)
a
lumInum
1”(25mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
2500 hz.
y
es
8 ohms
45 hz to
20,000 hz
1
150 Watts
88 Db
2
10¾” DIameter
5” DePth
9¾” DIameter
6¼ lbs. each
MC-414
In-Wall 2-Way
W
/Dual Woofers
4”(101mm)
a
lumInum
1”(25mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
3500 hz.
y
es
6 ohms
55 hz to
20,000 hz
1
150 Watts
91 Db
2
7¼” WIDth
15½” heIght
3½” DePth
6” WIDth
14¼ ” heIght
6 lbs. each
MC-616
In-Wall 2-Way
W
/Dual Woofers
6½”(165mm)
a
lumInum
1”(25mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
3000 hz.
y
es
6 ohms
50 hz to
20,000 hz
1
180 Watts
91 Db
2
9” WIDth
20¼” heIght
3¾” DePth
7¾” WIDth
19” heIght
7 lbs. each
Model
system tyPe
Woofer DIameter
Woofer cone
tWeeter
c
rossover
crossover frequency
tWeeter ProtectIon
system ImPeDance
frequency range
PoWer
sensItIvIty
fInIsheD DImensIons
cutout DImensIons
WeIght
MCS-88
In-Wall
Dual subWoofer
8”(203mm)
a
lumInum
n/a
12
Db/octave
100 hz.
n/a
8 o
hms x 2
40 h
z to
150 hz
1
180 Watts
90 Db
2
10¼” WIDth
18¾” heIght
3¾” DePth
9” WIDth
17½” heIght
10 lbs. each
MC-615-70
In-ceIlIng 2-Way
70 volt reaDy
6½”(165mm)
a
lumInum
¾”(19mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
3000 hz.
y
es
8 ohms/70 volt
50 hz to
20,000 hz
1
120 Watts
88 Db
2
10¼” DIameter
9½” DePth
8 ¾” DIameter
8 lbs. each
TK-815
In-ceIlIng 2-Way
8”(203mm)
f
Iberglass matrIx
1”(25mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
2500 hz.
y
es
8 ohms
50 hz to
20,000 hz
1
110 Watts
88 Db
2
10¾” DIameter
5” DePth
9¾” DIameter
5½ lbs. each
Architectural Series
TK Series continued…
MC Series
TK-6
In-Wall 2-Way
6½”(165mm)
f
Iberglass matrIx
1”(25mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
3000 hz.
y
es
8 ohms
50 hz to
20,000 hz
1
100 Watts
88 Db
2
8¾” WIDth
12” heIght
3” DePth
7½” WIDth
11” heIght
4¾ lbs. each
TK-615
In-ceIlIng 2-Way
6½”(165mm)
f
Iberglass matrIx
¾” (19mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
3000 hz.
y
es
8 ohms
50 hz to
20,000 hz
1
100 Watts
88 Db
2
9¼” DIameter
4½” DePth
8” DIameter
4 lbs. each
TK Series
TK-8
In-Wall 2-Way
8”(203mm)
f
Iberglass matrIx
1”(25mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
2500 hz.
y
es
8 ohms
50 hz to
20,000 hz
1
110 Watts
88 Db
2
10¼” WIDth
14¼” heIght
3¾” DePth
9” WIDth
12¾” heIght
5 lbs. each
MC-6
In-Wall 2-Way
6½”(165mm)
a
lumInum
1”(25mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
3000 hz.
y
es
8 ohms
50 hz to
20,000 hz
1
120 Watts
88 Db
2
8¾” WIDth
12” heIght
3½” DePth
7½” WIDth
11” heIght
5 lbs. each
It is the policy of RBH to continuously incorporate improvements into products. All specifications are subject to change without notice. Notes: 1 —
±
3Db; 2 — 2.83V @ 1M
A-414
In-Wall 2-Way
4”(102mm)
P
olygraPhIte
1”(25mm)
s
Ilk Dome WIth
acoustIc lens
12 Db/octave
4000 hz.
y
es
6 ohms
60 hz to
20,000 hz
1
80 Watts
90 Db
2
7¼” WIDth
15½” heIght
3½” DePth
6” WIDth
14¼ ” heIght
5½ lbs. each
MC-884
In-Wall 3-Way
surrounD
8”(203mm)
a
lumInum
Dual 1”(25mm)
& 2½”(64
mm)
a
lumInum WIth
acoustIc lens
12 Db/octave
2,000 hz to
8,000 h
z
1
yes
6 ohms
40 hz to
20,000 h
z
1
200 Watts
89 Db
2
10 ¼” WIDth
19” heIght
3¾” DePth
9” WIDth
17¾” heIght
13 lbs. each
next