Filter
Top Products
11
Basic Operation
4 Install Remote Control Batteries
1. Press the tab to remove the battery cover.
2. Insert two AAA batteries (not supplied) as indicated by the polarity symbols (+ and –)
marked on the remote control.
3. Replace the battery cover.
b Battery Notes:
Dispose of batteries promptly and properly. Do not burn or bury them.
Use only fresh batteries of the required size and type.
Do not mix old and new batteries, different types of batteries (alkaline, or rechargeable),
or rechargeable batteries of different capacities.
If you do not plan to use the remote control for a long time, remove the batteries.
Batteries can leak chemicals that can damage electronic parts.
5 Setting the Clock
1. In standby mode, press DISPLAY/TIME on the remote control. The first hour digit
flashes.
2. Press or to adjust each hour and minutes
digits.
3. Press or
to move to the hour or
minutes digit you want to adjust.
4. Press DISPLAY/TIME to save your settings.
5. Press REPEAT/ST on the remote control to select 12 h or 24 h time format.
Basic Operation
FM Radio
1. Press POWER to turn on the unit.
2. Press FUNCTION to select FM mode. FM
displays.
3. Press or
to tune down or up to find a
station.
Press and hold or
to auto search stations.
4. Press VOL + or VOL – to adjust the volume.
5. Press REPEAT/ST on the remote control to select stereo or mono mode.
Storing Stations
1. Tune to the desired station.
2. Press ENTER. The program location flashes.
3. Press 0 through 9 on the remote control to
select a memory location (total of 10 preset
stations are available).
4. Press ENTER to store the station.
Recalling Station
1. To recall stored stations, press number 0 through 9 to access the desired memory location.
iPod/iPhone
Dock and Charge
1. Select the docking adapter that fits your iPod/iPhone model.
Refer to the number marked on the adapters:
Adapter No. Compatible Models
10 Video 60G/80G & Classic 10G
13 Nano 3G
14 Touch 1G
15 iPhone 3G
16 Touch 2G
FM 107.3
MHz
P01 107.3
MHz
12:00
AM