QSC Audio ISA450 Stereo Amplifier User Manual


 
Features
Four models for low impedance applications
ISA1350 drives 70 volt lines directly with 1500 watts per channel
Three “Ti” versions include low impedance and isolated 25, 70, and 100 volt
outputs for distributed audio systems
ISA450 and ISA750: THX
™ approved for professional cinema applications
Rear panel gain controls for tamper resistant operation with 2 dB detents for quick
and repeatable settings
XLR and detachable Euro style input connectors
DataPort V2 for use with DPV2 compatible signal processing accessories
(XC-3, SF-3, LF-3) and DSP-3/DSP-4 (with external power supply)
Independent defeatable clip limiters for reduced distortion
Selectable high-pass filters protect speakers and prevent speaker transformer
saturation with minimal effect on program material (30 Hz or 70 Hz on non-”Ti”
models, 50 Hz or 75 Hz on “Ti” models)
Class H complementary bipolar output circuitry reduces AC power draw and waste
heat by 40% on ISA750 and ISA800Ti, and by 50% on ISA1350
Front panel indicators include power, signal, and clip (and protect on ISA1350)
Covered barrier strip output connectors for safety agency compliance
Automatic variable-speed fan for quiet normal operation with maximum cooling
on demand
Rear-to-front air flow keeps equipment racks cool
Stereo, bridge, or parallel operating modes
Comprehensive protection circuitry including DC, infrasonic, thermal overload, and
short circuit protection
3 year warranty plus optional 3 year extended service contract
“Ti” Models
Isolated 25, 70, 100 volt, and low impedance outputs available simultaneously
Simple barrier strip connection determines output mode
“Ti” models have fully isolated 25, 70, and 100 volt outputs
The ISA Installed System Amplifiers are designed
to meet the needs of sound system designers
and contractors worldwide. Three models feature
isolated 25, 70, and 100 volt outputs for distributed
sound systems, while four low impedance models
are rated for 2 ohm operation. The ISA 1350 drives
70 volt lines directly with 1500 watts per channel.
Versatile loading options and a comprehensive
set of features make the ISA Series a rugged,
cost-effective power solution for any permanently
installed sound system.
ISA Series
ISA Power Amplifiers
Watts per channel
Model 70V* 8Ω** 4Ω** 2
ISA280 185 280 430
ISA450 260 425 700
ISA750 450 650 1200
ISA1350 1500
††
800 1300 2000
ISA300Ti 300 185 280 430
ISA500Ti 500 260 425 700
ISA800Ti 800 450 650 1200
* 50 Hz – 16 kHz, 0.5% THD
** 20 Hz – 20 kHz, 0.1% THD
†1 kHz, 1% THD
†† Direct Output, 70V, less than 0.5% THD, 20 - 20 kHz
Professional Power Amplifiers
ISA280 | ISA450 | ISA750 | ISA1350 | ISA300Ti | ISA500Ti | ISA800Ti
THX is a trademark of THX Ltd.