Pioneer VSX-D414 Stereo Receiver User Manual


 
Connecting up
03
19
En
DO NOT CONNECT A MONITOR, TV SET,
HEATER, OR SIMILAR APPLIANCE TO THIS
UNIT'S AC OUTLET.
Do not connect appliances with high power
consumption to the AC OUTLET in order to
avoid overheating and fire risk. This can also
cause the receiver to malfunction.
This unit should be disconnected by removing
the power plug from the wall socket when not in
regular use (ex. when on vacation).
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull
out the plug by tugging the cord and never
touch the power cord when your hands are wet
as this could cause a short circuit or an electric
shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with
other cords. The power cords should be routed
such that they are not likely to be stepped on. A
damaged power cord can cause a fire or give
you an electrical shock. Check the power cord
once in a while. When you find it damaged, ask
your nearest Pioneer authorized service center
or your dealer for a replacement.
Extra Power mode speaker set up
VSX-D414 only see Using the Advanced
surround effects on page 27 to switch on the
Extra Power mode (EX POWER).
Front left
Surround
left
Surround
right
Listening position
Center
Subwoofer
Front right
AC outlet
[switched 100 W (0.8 A) max]
Power supplied through this outlet is turned on
and off by the receiver's power switch. Total
electrical power consumption of connected
equipment should not exceed 100 W (0.8 A).
AC OUTLET
SWITCHED
100 W MAX
0.8 A MAX
XRE3077A.En.12.19 03.12.4, 7:46 PM19