Filter
Top Products
Connecting your equipment
17
En
English
Español
02
02
Connecting your DVD player with no HDMI
output
This diagram shows connections of a TV (with HDMI input)
and DVD player (or other playback component with no HDMI
output) to the receiver.
• If your player has a component video output, you can
connect these too. See Using the component video jacks
on page 19 for more on this.
• The following connection/setting is required to listen to
the sound of the TV over this receiver.
-
If the TV does not support the HDMI Audio Return
Channel function, connect the receiver and TV with
audio cables (as shown).
-
If the TV supports the HDMI Audio Return Channel
function, the sound of the TV is input to the receiver via
the HDMI terminal, so there is no need to connect an
audio cable. In this case, set ARC at HDMI Setup to ON
(see HDMI Setup on page 42).
Note
• In order to listen to the audio from the DVD player that is
connected to this receiver using an optical cable or a
coaxial cable, first, switch to the DVD input, then use
and SIGNAL SEL to choose the audio signal O2
(OPTICAL2) or C1 (COAXIAL1) (see Selecting the audio
input signal on page 25).
RECEIVER
HDMI
VIDEO
COMPONENT
VIDEO
DVR/
BDR
L
R
R
L
YP
B
P
R
AUDIO
ANTENNA
OPTICAL
ASSIGNABLE
ASSIGNABLE
ASSIGNABLE
OUT
A
DVR/BDR
OUT
CD-R/TAPE
L
R
COAXIAL
IN
(
CD
)
1
PRE OUT
SUBWOOFER
IN IN
CD
MONITOR
OUT
TV/SAT
IN
BD
IN
OUT
IN DVD IN
IN
TV/SAT
BD
IN
DVD
(
DVD
)
IN
1
MONITOR
OUT
(
DVR /
BDR
)
IN
2
DVR/BDR IN
DVD IN
BD IN
VIDEO 1 IN
(
TV/SAT
)
IN
1
(
CD-R/TAPE
)
IN
2
FM UNBAL
75
(
OUTPUT 5
V
0.1 A MAX
)
ADAPTER PORT
AM LOOP
IN
SIRIUS
FRONT
R L
CENTER
HDMI
OUT
HDMI IN
RL
DIGITAL AUDIO OUTANALOG AUDIO OUT
OPTICAL COAXIAL
VIDEO OUT
RL
DIGITAL AUDIO OUT ANALOG AUDIO OUT
OPTICAL
Select one
TV
DVD player
Select one
If the TV does not support
the HDMI Audio Return
Channel function, this
connection is required to
listen to the TV sound
over the receiver.
VSX-921_UCSMXCN_En.book 17 ページ ２０１１年１月６日 木曜日 午後４時３４分