Filter
Top Products
INSTALLATION AND ASSEMBLY
34
2. INSTALLATION AND ASSEMBLY
(1) Confirmation
1 Decide the position for installing the system according to the installation conditions in
Chapter 3.
Check items
[1] Dimensions of installing position, space at the back, distance to the ceiling
[2] Floor flatness, strength, roughness
[3] Position of power supply
[4] Installing location
Necessity for special measures for floor or wall (reinforcement covers, sheets, planks, etc.), route by
which set is to be moved in and out, width of route, availability of elevator, size and weight restrictions of
elevator, air-conditioning air currents, etc.
[5] Position, specifications, and structure of a transmission equipment, and image type
[6] Model number of equipment used, and their quantity (perform according to list).
Check if there is enough equipment for each unit
* These procedures must be performed by only one person.
(2) Unpacking
1 Packaging specifications
[1] Screen : 1 RM-V2550S 1149(W) x 174(H) x 903(D) mm 17.5 kg
2 RM-V2550S2 1149(W) x 174(H) x 903(D) mm 12 kg
[2] Cabinet : 1130(W) x 1309 (H) x 825(D) mm 88 kg
2 Unpacking tips
[1] Begin with unpacking the largest carton. place smaller cartons in the vacant carton of the larger items, and
dispose of the packing material while unpacking the cartons.
After unpacking, arrange the items in order of assembly to facilitate the later assembly operation.
Move the vacant cartons to another place so that they do not come in the way of assembly, and reserve as
wide a space as possible for the assembly.
* By placing opened cartons upside down, they can easily be distinguished from non-opened cartons.
Manage the accessories, warranty cards, etc. so as not to lose them.
[2] The cabinet is designed with a structure that is easy to tumble down. It should be unpacked in as close as
possible location to the system installation position.
The under-carton can be used to prevent the cabinet from tumbling down because will not tumble down in
that location. After unpacking the cabinet from the under-carton, immediately place the cabinet on the stand
(when a stand is used) and fix using bolts.