Filter
Top Products
92
ADJUSTMENTS
3 Center adjustment
Set to only green and adjust the center with
V STATIC GH STATIC␣ .
Note) Please to not move the center more than
2.5cm from the initial setting (128) in the
upward, downward or left and right direc-
tions. If the center needs to be moved more
than this, this could cause malfunctioning of
the multi projection unit or harmful effects
from magnetism.
2 Adjustment signal input
For adjusting size ..................................................... Frame size picture(EX.LD Test disc GGT1072, FRAME No.
5941),Monoscope, etc.
For screen joining, linearity, color adjustment. ..... Use adjustment signals such as , cross-hatch, etc. (EX. LD
Test disc GGT1072, FRAME No. 7081,etc.)
(Note)
For the particulars about the FRAME No.,etc. of LD Test disc GGT1072,refer to the disc manual differently.
1 Measurement of screen center
The center can be found easily by pasting threads in
the spaces of the protection panels at the screen
frame.
Center
V STATIC
GH STATIC
(3) Convergence adjustment contents
The & numbers correspond to the numbers in the flow-chart.