Pioneer V2550BU Home Theater System User Manual


 
48
INSTALLATION AND ASSEMBLY
[Fig. 3-4-13]
Installing the screen frame ass’ies
[1] Attach hooking brackets (L) (R) onto all of the screen frames to be used. [Fig. 3-4-12]
NOTE) Be sure to stand the screen frames vertically during work.
Use care in the difference in shape
between L and R.
4 dia. x 8 (x4 points)
[Fig. 3-4-12]
[2] Connect the screen frames vertically to form screen frame ass’ies. [Fig. 3-4-13]
Adjust their positioning before attaching using screws.
NOTE) 1. Be sure to stand the screen frames vertically during work. [See the description under “(3) Carrying
the units after opening packaging”.]
NOTE) 2. As the points where screws are attached are dented, use a magnetized screwdriver.
NOTE) 3. Front/rear positioning: Make the rear surfaces flush.
Left/right positioning: Adjust so that the side edge where the left and right screen frame ass’ies
meet is on a same plane.
Holes to be used (x 5)
View in the direction of arrow A
Make side
surfaces flush.
Make rear
surfaces flush.
Cross-sectional view
Screen surface
4 dia. x 8 x8 points
(provided with
screen frame)
4 dia. x 8 x5 points