Filter
Top Products
93
ADJUSTMENTS
Observe
here
Reference information
To adjust the NTSC input for horizontal 93% and vertical 92%, use the frame size screen of the LD test
disc GGT1072 (frame No. 5941).
Horizontal : Adjust so that the sixth 92.5% line from the inside can be seen completely.
Vertical : Adjust so that the sixth 92.5% line from the inside can be seen only slightly.
3 V SIZE, V LINEARITY, H SIZE, GH LINEARITY adjustment
Those familiar with the convergence adjustment can adjust the bottom part of the screen in addition to the
top part of the screen using V SIZE and V LINEARITY . Also it can adjust the left side of the screen in addition
to the right side of the screen using H␣ SIZE and GH LINEARITY .
4 V SIZE, V LIN, H SIZE Adjustment
1 V SIZE adjustment
Set to only green, observe the top part of the screen ,
and adjust the data amount in the vertical direction us-
ing V SIZE .
Do not observe the bottom part of the screen.
Observe here
2 H SIZE adjustment
Set to only green, observe the right side of the screen ,
and adjust the data amount in the horizontal direction
using H SIZE .
Do not observe the left side of the screen.