Pioneer SC-05 Stereo Receiver User Manual


 
Playback with HOME MEDIA GALLERY inputs
10
80
En
2 Continue browsing until you arrive at what you
want to play, then press
to start playback.
1
Basic playback controls
The following table shows the basic controls on the
remote for USB playback. Set the operation selector
switch to SOURCE, then press HOME MEDIA GALLERY
to switch the remote control to the USB operation mode.
Important
If a USB ERROR1 message lights in the display, the
power requirements of the USB device are too high for
this receiver. Try following the points below:
Switch the receiver off, then on again.
Reconnect the USB device with the receiver switched
off.
Use a dedicated AC adapter (supplied with the
device) for USB power.
If this doesn’t remedy the problem, it is likely your USB
device is incompatible.
Playing back photo files stored in
components on the network or USB memory
device
When you select photo Top Menu or USB list screen, the
Photo Player automatically launches. The selected
content is displayed in full screen by pressing ENTER.
Select a category, folder or device to access the submenu
containing the required file or content.
2
Pressing ENTER again allows a slideshow to begin. After
a slideshow launches, pressing ENTER toggles between
play and pause. Instead of pressing ENTER twice, you
can press to start the slideshow immediately.
Basic playback controls
Listening to Internet radio stations
About Internet radio
Internet radio is an audio broadcasting service
transmitted via the Internet. There are a large number of
Internet radio stations broadcasting a variety of services
from every corner of the world. Some are hosted,
managed, and broadcast by private individuals while
others are by the corresponding traditional terrestrial
radio stations or radio networks. Whereas terrestrial, or
OTA (over-the-air), radio stations are geographically
restricted on the range of radio waves broadcast from a
transmitter through the air, Internet radio stations are
accessible from anywhere in the world, as long as there
Note
1 • If the file selected cannot be played back, this receiver automatically skips to the next file playable.
• When the file currently being played back has no title assigned to it, the file name is displayed in the OSD instead; when neither the album
name nor the artist name is present, the row is displayed as a blank space.
• Note that non-roman characters in the playlist are displayed as #.
Button What it does
Press to start playback.
If you start playback when something other than a
song is selected, all the songs that fall into that
category will play.
Pauses playback.
/ Press to skip to previous/next track.
: Press to switch to Repeat All (available only
during playback)
: Press to switch to Repeat One (available
only during playback)
Press repeatedly to switch between Random On
and Random Off.
DISP Press repeatedly to change the song playback
information displayed in the front panel display.
ENTER When browsing, press to move to next levels.
During playback, press to set the play and pause
modes.
RETURN When browsing, press to move to previous levels.
/ When browsing, press to move to previous/next
levels.
TOP MENU Press to return to the Top Menu.
Play mode
Track title or File name
Album title or Folder
name
Artist name
Track Title
USB
Top Menu
Return
Random On
PLAY 0003:02 -0002:02
Artist Name
Now Playing
Album Title
Genre : xxxxxxxxxxx
Format : xxxxxxxxxxx
Bit Rate : xxxxxxxxxxx
Playing time
File information
1
2 If a single photo file is displayed for 5 minutes, the list screen reappears. In the same way, the list screen reappears if the slide show is left in
the pause mode for 5 minutes.
Button(s) Function
ENTER Starts displaying a photo or playing a slideshow.
RETURN,
,
Stops the Player and returns to the previous
menu.
Displays the previous photo content
Display the next photo content
Plays a slideshow
Pauses the slideshow
SC07-05.book Page 80 Friday, April 25, 2008 11:59 AM