Filter
Top Products
Additional information
15
119
En
HOME MEDIA GALLERY
Symptoms Causes Remedies Refer to
Cannot access the
network.
The LAN cable is not firmly connected. Firmly connect the LAN cable. 74
The router is not switched on. Switch on the router. —
Internet security software is currently
installed in the connected component.
There are cases where a component with
Internet security software installed cannot be
accessed.
—
The audio component on the network which
has been switched off is switched on.
Switch on the audio component on the
network before switching on this receiver.
—
Playback does not start
while ‘Connecting...’
continues to be displayed.
The component is currently disconnected
from this receiver or the power supply.
Check whether the component is properly
connected to this receiver or the power
supply.
—
The PC or Internet radio is
not properly operated.
The corresponding IP address is not properly
set.
Switch on the built-in DHCP server function
of your router, or set up the network manually
according to your network environment.
84
The IP address is being automatically
configured.
The automatic configuration process takes
time. Please wait.
—
The audio files stored on
components on the
network, such as a PC,
cannot be played back.
Windows Media Player 11 is not currently
installed on your PC.
Install Windows Media Player 11 on your PC. 75
Audio files were recorded in formats other
than MP3, WAV (LPCM only), MPEG-4 AAC,
FLAC, and WMA.
Play back audio files recorded in MP3, WAV
(LPCM only), MPEG-4 AAC, FLAC, or WMA.
Note that some audio files recorded in these
formats may not be played back on this
receiver.
—
Audio files recorded in MPEG-4 AAC or FLAC
are being played back on Windows Media
Player 11 or Windows Media Connect.
Audio files recorded in MPEG-4 AAC or FLAC
cannot be played back on Windows Media
Player 11 or Windows Media Connect. Try
using another server.
Refer to the
operation
manual
supplied
with your
server.
The component connected to the network is
not properly operated.
Check whether the component is affected by
special circumstances or is in the sleep
mode.
Try rebooting the component if necessary.
—
The component connected to the network
does not permit file sharing.
Try changing the settings for the component
connected to the network.
—
The folder stored on the component
connected to the network has been deleted
or damaged.
Check the folder stored on the component
connected to the network.
—
Cannot access the
component connected to
the network.
The component connected to the network is
not properly set.
If the client is automatically authorized, you
need to enter the corresponding information
again. Check whether the connection status
is set to “Do not authorize”.
—
There are no playable audio files on the
component connected to the network.
Check the audio files stored on the
component connected to the network.
—
SC07-05.book Page 119 Friday, April 25, 2008 11:59 AM