Pioneer S-L8-LRW Stereo Receiver User Manual


 
62
En/Fr
Cancelling the Record
Timer
Once the timer recording has finished, the timer is automatically
canceled. However, if you need to cancel it before the recording has
started, (either because you made a mistake setting it, or simply
because you no longer want to make the recording), here’s how
you do it.
1 Select TIMER REC from the timer menu.
Switch between timer menu options using the $ and
buttons; select the option by pressing SET.
After pressing SET, the timer indicator in the display goes
out.
AUX/CD-R SOUND DISPLAY SET MD TAPE TIMER/
CHARACTER
&
CANCEL
REC
$
!
›
+
⁄
VOL
STANDBY/ ON
MENU SET
4
¢
Confirm that you’re recording to tape
If the clock and record indicators are lit, then when you press
SET...
...the record timer is canceled
After pressing SET, the display shows you the settings you’ve
just made, including the switch on and off times, and the
components you’re recording to and from.
The little clock and record symbols in the display indicate
that the record timer is set.
Be sure to switch the system into standby mode before timer
recording starts. (In standby mode you can check the timer
settings by pressing TIMER.)
After the recording has finished, the timer recording mode is
automatically canceled.
Annulation de la minuterie
d’enregistrement
Lorsque l’enregistrement est terminé, la minuterie se désactive
automatiquement. Si toutefois vous vouliez l’annuler avant le
début de l’enregistrement (à cause d’une erreur de réglage ou bien
si vous ne voulez plus effectuer cet enregistrement), voici
comment procéder.
1 Sélectionnez TIMER REC sur le menu de
la minuterie.
Sélectionnez une option du menu en appuyant sur les
touches $ et et validez l’option en appuyant sur
SET.
Après une pression sur SET, l’indicateur de minuterie
disparaît de l’afficheur.
Vérifiez que vous enregistrez sur un cassette
Lorsque les symboles d’horloge et d’enregistrement sont
allumés, appuyez sur SET…
...pour annuler la minuterie
Après une pression sur SET, les réglages effectués
apparaissent sur l’afficheur, d’abord les heures de début et de
fin d’enregistrement puis les appareils depuis lesquels et sur
lesquels vous enregistrez.
Les symboles d’horloge et d’enregistrement indiquent que la
minuterie d’enregistrement est activée.
N’oubliez pas de mettre la chaîne en mode de veille avant le
début de l’enregistrement. (En mode de veille vous pouvez
vérifier les réglages de la minuterie en appuyant sur TIMER.)
Lorsque l’enregistrement est terminé, le mode
d’enregistrement programmé est automatiquement annulé.