Filter
Top Products
80
ENG/MASTER 98
81
Fine Adjusting Audio (Expert)
4. Select “Frequency”, “EQ Level” or “Q
Factor” by moving the joystick up/down.
Selected option is highlighted in green.
5. Adjust the selected option by moving the joy-
stick left/right.
The selectable options are adjustable in the following
limits:
Option Adjustable Range
Frequency 100 Hz – 8 kHz
EQ Level –12 dB – +12 dB
Q Factor WIDE/NARROW
Note:
• The Front Left and Right speakers cannot be adjusted differently. The same is true for the
Rear Left and Right. When you make adjustment to either of the pair, the other is automatical-
ly set to the same position.
6. Select “Band” by moving the joystick up.
7. Repeat steps 3 – 6 for the selected band.
8. Complete the setting by clicking the joystick.
9. Repeat steps 1 – 8 for other speakers.
Adjusting the Speakers’ Output Level
You can readjust the speakers’ output levels once adjusted using a test tone while hearing
music this time.
1. Select a speaker by moving the joystick.
The currently selected speaker is highlighted in green.
2. Click the joystick.
You are ready to make adjustments to the selected
speaker. “Band” is highlighted in green.
Continued overleaf.
CRB1585A/Eng/066-097 08-06-2000 14:51 Page 81