Filter
Top Products
Adjusting Audio (Basic)
Equalizer Curve
You can switch between Equalizer curves.
1. Select “Equalizer” by moving the joystick.
“Equalizer” is highlighted in green.
2. Click the joystick.
The Graphic Equalizer Menu appears, with “Band”
highlighted in green.
3. Select either “EQ+” or “EQ–” by moving the
joystick up/down.
4. Click the joystick.
Each click changes EQ curve in the following order:
With “EQ+” selected:
Powerful = Natural = Vocal = Custom = Flat
= Super Bass
With “EQ–” selected:
Powerful = Super Bass = Flat = Custom = Vocal = Natural
Note:
• “CUSTOM” stores an equalizer curve you have made adjustments to. (Refer to “Adjusting the
Equalizer Curves” on page 83.)
• You can create a different “CUSTOM” curve for each of the SLA function groups (see page
71). Remember, however, SLA is based on FM volume, so FM and MW/LW curve are always
the same.
70
ENG/MASTER 98
71
CRB1585A/Eng/066-097 08-06-2000 14:50 Page 71