Filter
Top Products
15
ENG/MASTER 98
16
Using the Screen Pictures (Selecting the NAVI, VTR etc.)
Using the Screen Pictures
(Selecting the NAVI, VTR etc.)
Selecting the Mobile Navigation Picture
You can switch the picture (separately from the audio) of the Mobile Navigation to another
source while listening to the sound from the current source.
Switch the power to your navigation unit ON before performing operations.
(Refer to the navigation manual.)
• Select the “NAVI” by pressing the V.SEL but-
ton.
Note:
• You can select the Pioneer Mobile Navigation Unit only
when that unit is switched on.
• If, while “NAVI” is selected as source, you switch off your
navigation unit, you can confirm it on the display.
Selecting the Video Source
Switching the Video ON/OFF Mode
You can select the video unit when one is connected to the video input on this product.
To select the Video mode, switch the Video in the Set Up Menu On.
1. Press the MENU button.
The main menu icons whirl down, with
“Function” highlighted in green.
2. Select “Set Up” by moving the joystick.
“Set Up” is highlighted in green.
3. Click the joystick.
The Set Up Menu appears.
4. Select “Video” by moving the joystick.
“Video” is highlighted in green.
5. Click the joystick.
Each click toggles Video On/Off.
6. Press the RETURN button.
You go back to the Center Room.
CRB1585A/Eng/001-035 08-06-2000 14:13 Page 16