Philips SHH9201 Headphones User Manual


 
SHH9201/00
In-Ear Headphones
Specifications Product highlights
Sound
Acoustic system: Open
Magnet type: Neodymium
Voice coil: CCAW
Diaphragm: Mylar dome
Frequency response: 6 - 23 500 Hz
Impedance: 32 Ohm
Maximum power input: 50 mW
Sensitivity: 99 dB
Speaker diameter: 10 mm
Type: Dynamic
Connectivity
Cable Connection: Two-parallel, asymmetric
Cable length: 0.35 m + 1 m
Connector: 3.5 mm stereo
Finishing of connector: 24k Gold-plated
Type of cable: OFC
Accessories
Carrying case
Extension cable
Inner Box
Gross weight: .531 kg
Inner carton (L x W x H): 23.3 x 18.5 x 11.3 cm
Net weight: 0.096 kg
Tare weight: .435 kg
Outer Box
Gross weight: 10.016 kg
Outer carton (L x W x H): 48.8 x 39.8 x 49.2 cm
Net weight: 1.536 kg
Tare weight: 8.48 kg
Packaging dimensions
Packaging dimensions (W x H x D):
9.9
x 21.9 x 2.6 cm
Gross weight: 0.064 kg
Net weight: 0.016 kg
Tare weight: 0.048 kg
Issue date 2008-10-11
Version: 4.0.10
12 NC: 8670 000 32739
EAN: 87 12581 35459 6
© 2008 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
www.philips.com
Passive noise isolation
The perfect, snug fit inside your ear stops unwanted
background noise detracting from the pure pleasure of
your favourite music. This means you still enjoy the
headphones' superb sound quality at lower volume
settings and also benefit from a longer battery life.
Neodymium magnet
Neodymium is the best material for producing a strong
magnetic field for greater sensitivity in a voice coil, better
bass response and higher overall sound quality.
CCAW voice coil
By using top-quality Copper Cladded Aluminium Wire
(CCAW) in the headphone driver's voice coil, the sound
quality is considerably improved.
24 k Gold-plated plug
You can rest assured that the precious metal gold
finishing on the plug will give you a more reliable
connection for better quality audio.
For optimal fit in all ears
With a choice of three interchangeable ear caps from
size small to large, surely there is a pair that fits your ear
perfectly.
Asymmetric cabling system
This simple yet highly effective solution to cable tangling
works effectively by enabling you to hang the cable
behind your neck instead of under your chin.
Super soft rubber caps
The ultra-soft rubber material on the rubber caps is
sensational to the touch and adapts effortlessly to your
ear. In-ear headphones have never been this comfortable.
Carry case
This case is the most convenient way to look after your
headphones and prevent the cable tangling when not in
use.
Split cable
This standard cable has a 3.5 mm socket on one end and
a 3.5 mm plug on the other for extending your freedom
of movement with headphones.
Microphone-friendly headphone
The cable length of this headphone is designed to
optimise sound picked up from the microphone of your
hands-free connector. It also optimises overall cable
length to the mobile phone.
Made for Nokia XpressMusic
This product has been designed for use with Nokia
XpressMusic phones. Extensive testing has been carried
out with these phones to make sure you will get the best
out of your phone in combination with this Philips
product.