Philips Semiconductors Linear Products Product specification
NE/SA/SE5512Dual high-performance operational amplifier
78
August 31, 1994 853-0948 13721
DESCRIPTION
The 5512 series of high-performance operational amplifiers provides
very good input characteristics. These amplifiers feature low input
bias and voltage characteristics such as a 108 op amp with
improved CMRR and a high differential input voltage limit achieved
through the use of a bias cancellation and PNP input circuits with
collector-to-emitter clamping. The output characteristics are like
those of a 741 op amp with improved slew rate and drive capability,
yet have low supply quiescent current.
APPLICATIONS
• AC amplifiers
• RC active filters
• Transducer amplifiers
• DC gain block
• Battery operation
• Instrumentation amplifiers
FEATURES
• Low input bias < ±20nA
• Low input offset current < ±20nA
• Low input offset voltage <1mV
• Low VOS temperature drift 5µV/°C
• Low input bias temperature drift 40pA/°C
• Low input voltage noise 30nV/√Hz
• Low supply current 1.5mA/amp
• High slew rate 1.0V/µs
• High CMRR 100dB
PIN CONFIGURATIONS
N Package
D Package
1
NOTE:
1.The D package pinout is not functionally identical
to the N pinout.
8
7
6
54
3
2
1OUTPUT 1
-INPUT 1
+INPUT 1
V-
V+
OUTPUT 2
-INPUT 2
+INPUT 2
8
7
6
54
3
2
1+ INPUT 1
-INPUT 2
+INPUT 2
V-
V+
OUTPUT 1
-INPUT 1
OUTPUT 2
TOP VIEW
TOP VIEW
1
2
• High input impedance 100MΩ
• High PSRR 110dB
• High differential input voltage limit
• No crossover distortion
• Indefinite output short circuit protection
• Internally-compensated for unity gain
• 600Ω drive capability
• MIL-STD processing available
ORDERING INFORMATION
DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG #
8-Pin Plastic Small Outline (SO) Package 0 to 70°C NE5512D 0174C
8-Pin Plastic Dual In-Line Package (DIP) 0 to 70°C NE5512N 0404B
8-Pin Plastic Small Outline (SO) Package -40 to +85°C SA5512D 0174C
8-Pin Plastic Dual In-Line Package (DIP) -40 to +85°C SA5512N 0404B
8-Pin Plastic Dual In-Line Package (DIP) -55 to +125°C SE5512N 0404B