Filter
Top Products
14
English
Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
● In Active standby, or Eco standby, press
STANDBY-ON (y on the remote control).
➜ The system will switch to the last selected
source.
● Press SOURCE (CD, TUNER or DOCK on
the remote control).
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press STANDBY-ON (y on the remote
control).
➜ The clock is displayed.
To switch the system to Eco-power
standby mode
● Press and hold STANDBY-ON (y on the
remote control) for more than 2 seconds.
➜ The clock is displayed.
Power-saving automatic standby
The power-saving feature automatically switches
to Eco power standby 15 minutes after a CD
playback has ended and no control is operated.
Note:
– In the Eco power standby, no button, except
SOURCE, and STANDBY-ON buttons, can
be activated.
SOURCE VOLUME
-
+
BAND
O
P
E
N
/
C
L
O
S
E
PROG/CLOCK
TUNING
STANDBY-ON
Adjusting volume and sound
1 Press VOLUME
–
/
+
to increase or decrease
volume.
➜ Display shows the volume level
and a
number from 0-32.
2 Press DSC repeatedly to
select the desired sound effect:
JAZZ / POP / CLASSIC /
ROCK.
3 Press DBB (on the remote control) to switch
bass enhancement on or off.
➜ Display shows:
if the DBB is activated.
4 Press MUTE on the remote control to stop
sound play-back instantly.
➜ Playback will continue without sound and the
display shows MUTE .
● To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
VOLUME
DBB DSC
DBB
PG 001-024_MCM108DB_37-Eng 26/4/07, 17:0714