Filter
Top Products
37
[TV Display]
Selects one of the following display formats:
• [4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
• [4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
• [16:9 Wide Screen] – For wide-screen
TV: display ratio 16:9.
[Picture Setting]
Selects a predefi ned set of picture colour
settings or customises the personal setting.
• [Standard] – Original colour setting.
• [Bright] – Vibrant colour setting.
• [Soft] – Warm colour setting.
• [Personal] – Customises the colour
setting. Set the level of brightness, contrast,
sharpness/tint and colour saturation, then
press OK.
[HDMI Setup]
Selects the HDMI video setting when you
connect this Home Theatre System and the
TV with a HDMI cable.
• [Wide Screen Format] – Defi nes wide
screen format for disc play.
Option Description
[Superwide] Centre position of the screen
is stretched less than the side.
Applicable only to 720p and
above video resolution settings.
[4:3 Pillar
Box]
No stretching of picture. Black
bars are displayed on both
sides of the screen.
[Off] Picture is displayed according to
the disc format.
4:3 Letter Box (LB)
4:3 Pan Scan (PS)
16:9 (Wide Screen)
Video setup
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press to select [Video Setup], then
press
.
3 Select an option, then press OK
4 Select a setting, then press OK.
To return to the previous menu, •
press
BACK.
To exit the menu, press •
SETUP.
Note
See the explanations of the above options in •
the following pages.
[TV System]
Changes this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
• [PAL] – For PAL-system TV.
• [NTSC] – For NTSC-system TV.
• [Multi] – For TV that is compatible with
both PAL and NTSC.
Video Setup
HDMI Setup
Progressive
Component Video
Closed Caption
TV Display
TV System
Picture Setting
English
EN