Filter
Top Products
34
4 Select a setting, then press OK.
To return to the previous menu, •
press
BACK.
To exit the menu, press •
SETUP.
Note
See the explanations of the above options in •
the following pages.
[EasyLink Setup]
If this Home Theatre System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously:
Option Description
[EasyLink] Turns off or on all EasyLink
features.
To disable this feature, select [Off].
[One
Touch
Play]
When you press PLAY, the TV and
Home Theatre System are turned
on. Disc play starts if there is a disc
in the Home Theatre System.
To disable this feature, select [Off].
[One
Touch
Standby]
When you press and hold
STANDBY for at least three
seconds, the Home Theatre
System and all the HDMI CEC
devices switch to standby
simultaneously.
To disable this feature, select [Off].
[System
Audio
Control]
When you play audio that is
routed from the connected
devices, this Home Theatre System
switches to the corresponding
audio source automatically.
To enable this feature, select [On].
Then proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
[Audio
Input
Mapping]
When you map the audio input
correctly, this Home Theatre
System switches to the audio from
the played device automatically.
7 Adjust settings
You can customise various kinds of settings as
you prefer. Refer to the following instructions to
navigate through the setup menus.
Symbol Options
[General Setup]
[Audio Setup]
[Video Setup]
[Preferences]
Note
If the setup option is greyed out, it means the •
setting cannot be changed in the current state.
General setup
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press .
3 Select an option, then press OK.
OSD Language
Sleep Timer
Screen Saver
Disc Lock
EasyLink Setup
Display Dim
General Setup
Low Power Standby
DivX(R) VOD Code
EN