Filter
Top Products
24
If the code is stored successfully, the
indicator fl ashes green for 2 seconds,
then turns blue again.
5 Repeat steps 3 and 4 to program more
buttons on the smart remote control (A).
6 Press LEARN to exit the learning mode.
Note
During the learning process, the normal remote control
functions are disabled.
•
Rename an AV source
1
Press AV 1, AV 2, AV FRONT or COAX
to select an AV source you want to
rename.
The default name of the selected
sound source is displayed.
2 Press SETUP to activate the renaming
mode.
The default name of the selected
sound source fl ashes for 4 seconds.
3 Within 2 seconds, press PRESET/ALB/
to select a name that matches the AV
device connected with the current socket
from:
[TV]
[DVD]
[GAME] (game)
[SET TOP BOX] (set top box)
[CABLE] (cable)
[SATELLITE] (satellite)
»
»
»
•
•
•
•
•
•
8 Use more of
your soundbar
Program remote control
You can store a total of 12 most frequently
used functions of other AV devices in the smart
remote control. This feature allows you to use
only one remote control to operate all of your
AV devices.
By default, the remote control codes of a Philips
TV are stored in the smart remote control. The
available preset buttons are POWER, AV,
CH
, VOL , MUTE and SLEEP.
1 Place the smart remote control (A) within
1mm-10mm distance from the other
remote control (B).
2 Press LEARN for 2 seconds to activate the
learning mode.
A blue indicator on the smart remote
control (A) lights up.
3 Press the button on the other remote
control (B) that is to be stored on the
smart remote control (A).
If the code is received successfully, the
blue indicator fl ashes.
4 Press one of the white learning buttons on
the smart remote control (A) to store the
code of this button.
»
»
A (HSB3280)
1-10m
m
B
A (HSB3280)
1-10m
m
B
EN