Filter
Top Products
4 of 24
ISSUED: 08-27-07 SHEET #: 083-9007-2 07-09-08
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
Pre-assemble Shelf
Insert nine button bumpers (E) into shelf base (A)
indicated by arrows as shown below.
Place shelf glass (B) onto shelf base as shown right.
Note: Be certain shelf glass does not cover screw insert
holes on shelf base (A).
1
SCREW INSERT
HOLES
A
E
A
B
D
E
C
A
fig. 1.1
• Tighten screws so shelf mounting plate and glass are
firmly attached, but do not overtighten. Overtightening
can damage glass or screws.
WARNING
Insert three button bumpers (E) into shelf
mounting plate (C). Attach shelf mounting plate
(C) to shelf base (A) using two 1/4-20 x 3/4" flat
head socket screws (D) as shown in figure 1.1.
1-1
fig 1.2
1/4"
A
Thread two 1/4-20 x .75" socket screws (N) into
shelf base (A), leaving 1/4" of exposed thread
between the head of screw and shelf base as
shown in figure 1.2.
Repeat steps 1 through 1-2 for second shelf.
1-2
N
A