Peavey VSX 26 Speaker User Manual


  Open as PDF
of 6
 
Processor Settings for Versarray 112Neo & Subs
with VSX 26/48
(also Digitool/Prolinx)
Single VR112 Neo Cabinet w/118 Sub
Front End EQ (before the crossover section) = PEQ –2.0 dB @ 2k, bw= 0.6 (or use
1/3 octave band at 2 kHz set to –2.0 dB);
Infrasonic filtering: 24 dB/oct. LR @ 34 Hz)
Crossover settings:
Woofer= 24 dB/oct. LR @ 2.0 kHz, Tweeter= 24 dB/oct. Bessel @ 3.0 kHz, Woofer
Polarity Normal, Tweeter Polarity Normal
Sub to Woofer Crossover: Sub= 24 dB/oct. LR @ 125Hz, Woofer= 24 dB/oct LR @
100Hz, Sub Polarity Normal, Woofer Polarity Normal
EQ after crossover:
Woofer EQ = PEQ +1.5 dB @ 560 Hz, bw=0.5; PEQ -3.5 dB @ 850 Hz, bw=0.5
PEQ +3dB @ 115 Hz, bw= 2; PEQ –1.5 dB @ 2.2 kHz, bw=.7;
PEQ –2 dB @ 700 Hz, bw=3.0 Woofer Delay = 0.0 ms (none)
Tweeter EQ: PEQ –3 dB @ 2.7 kHz, bw= 0.7; PEQ +2.5 dB @ 4.6 kHz, bw= 1.0;
PEQ +3.5 dB @ 16.5 kHz, bw=1.0 Tweeter Delay = 0.0 ms (none)
Sub EQ: PEQ +4.0 dB @ 50 Hz, bw= 0.7; PEQ -2.5 dB @ 100 Hz, bw= 0.5
Setting up the
Versarray System
next