Peavey 1X Speaker User Manual


 
SP
1X
SPECIFICATIONS
Frequency response, 1 meter on-
axis, swept-sine in anechoic
environment:
56 Hz to 19 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
42 Hz
Power handling:
Full Range:
700 W continuous
1,400 W program
2,800 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
80 W continuous
160 W program
320 W peak
Sound pressure level, 1 Watt,
1-meter in anechoic environment:
Full Range:
99.0 dB SPL, (2.83 V input)
Low Frequency Section:
100.0 dB SPL, (2.83 V input)
High Frequency Section:
110.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full Range:
127 dB SPL continuous
133 dB SPL peak
Low Frequency Section:
127 dB SPL continuous
133 dB SPL peak
High Frequency Section:
129 dB SPL continuous
135 dB SPL peak
Radiation angle measured at -6 dB
point of polar response:
80
o
horizontal by 40
o
vertical
Transducer complement:
Low Frequency Section:
1x 15 in. woofer, vented
1508-8 HE BWX
High Frequency Section:
1x 1.6 in. exit/100 mm voice coil
compression driver on CD horn
44XT (w/o adapter) on a CH7 constant
directivity horn
Box tuning frequency:
Low Frequency Section:
50 Hz
Crossover frequency (internal
passive):
Low Frequency - High Frequency:
1,400 Hz
Recommended active crossover
frequency region and slope:
Low Frequency - High Frequency:
1600 Hz at 12 dB/octave, plus CD
horn EQ
Time offset:
Low Frequency:
Delay 0.67 ms
High Frequency:
0.00 ms
Impedance (Z):
Full Range:
Nominal: 8.0 Ω
Minimum: 6.4 Ω
Low Frequency:
Nominal: 8.0 Ω
Minimum: 6.9 Ω
High Frequency:
Nominal: 8.0 Ω
Minimum: 7.1 Ω
Input connections:
2x 1/4 in. phone jack and 1x Neutrik
®
NL4 Speakon
®
(bi-amp only)
Enclosure materials and finish:
3/4" OSB finished in black carpet
SPECS
PEAVEY ELECTRONICS