Filter
Top Products
SP
™
115MX
SPECIFICATIONS
Frequency response, 1 meter on-
axis, swept-sine in anechoic
environment:
100 Hz - 14 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
66 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
60 W continuous
120 W program
240 W peak
Sound pressure Level, 1 Watt,
1 meter in anechoic environment:
Full Range:
99.0 dB SPL, (2.83 V input)
Low Frequency Section:
100.0 dB SPL, (2.83 V input)
High Frequency Section:
106.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full Range:
126.0 dB SPL continuous
132.0 dB SPL peak
Low Frequency Section:
127.0 dB SPL continuous
133.0 dB SPL peak
High Frequency Section:
123.8 dB SPL continuous
129.8 dB SPL peak
Transducer complement:
Low Frequency Section:
1x 15 in. woofer, sealed
1508-8 HE BWX
High Frequency Section:
1x .875 in. exit/51mm voice coil
compression driver on CD horn
RX
™
22 on a CH
®
-3
Harmonic distortion:
1% rated power
2nd Harmonic:
100 Hz: 0.61%
1 kHz: 0.39%
3rd Harmonic:
100 Hz: 0.49%
1 kHz: 0.39%
10% rated power
2nd Harmonic:
100 Hz: 1.30%
1 kHz: 1.44%
3rd Harmonic:
100 Hz: 2.80%
1 kHz: 0.71%
Crossover frequency (internal
passive):
Low Frequency - High Frequency:
1,350 Hz
Recommended active crossover
frequency region and slope:
Low Frequency - High Frequency:
1,600 Hz at 18 dB/octave
Time offset:
Low Frequency: 0.00 ms
High Frequency: 0.25 ms
Impedance (Z):
Full Range:
Nominal: 8.0 Ω
Minimum: 6.4 Ω
Low Frequency:
Nominal: 8.0 Ω
Minimum: 7.1 Ω
High Frequency:
Nominal: 8.0 Ω
Minimum: 7.1 Ω
Input Connections:
2x 1/4 in. phone jack and 1x Neutrik
®
NL4 Speakon
®
(bi-amp only)
SPECS
PEAVEY ELECTRONICS