Filter
Top Products
CONCEPTSYSTEM EXAMPLESCONNECTIONSPRODUCTSBLOCK DIAGRAMS
61
4
PRODUCTS
WU-ZM001E
CONCEPT SYSTEM EXAMPLES CONNECTIONS PRODUCTS BLOCK DIAGRAMS
60
4
PRODUCTS
WU-ZM001E
SPECIFICATIONS
Computer software provided
(compatible with Windows 2000 and XP)
Supported languages: English and Simplified Chinese
The margin of the monthly error:±30 seconds (25˚C)
0 C˚ to +45 C˚
206 mm (W) x 45 mm (H) x 124 mm (D)
* Excluding protrusions.
665 g
Panel: Gun metal coating
Support software
Accuracy of the internal clock
Operating temperature range
Dimensions
Weight (Approx.)
Finish
Power Requirements
Frequency characteristics
Distortion factor
Audio signal input and
output
MSG Control Input/Output
Controls
Storage media
Audio signal format
Scheduled announcements
Emergency message
Rated Voltage
Consumption Current
Line system
Microphone system
Recording input
Monitor output
EMG1 message execute
input [EMG1]
EMG2 message execute
input [EMG2]
Regular announcement
execute input [MSG]
Clock compensation input
[CLK ADJ.]
Emergency message
Regular announcements
Menu controls
Volume adjustment
Playback
Recording
24 V DC (supplied internally by amplifier)
Approximately 220 mA
50 Hz to 15 kHz ± 2 dB
100 Hz to 10 kHz ± 2 dB
1 % or less (1 kHz standard)
Input level: Microphone -65 dBV/Line -12 dBV alternating,
input level is adjustable
Input impedance: 10 KΩ unbalanced
S/N quotient: 70 dB or higher (Line)
Monaural: 3.5 f mini-jack
Output level: -12 dBV, output level is adjustable
Output impedance: 32 Ω unbalanced (load impedance:
32 Ω or higher)
S/N quotient: 70 dB or higher
Stereo: 3.5f mini-jack
Open circuit voltage 5 V; Short circuit current 1 mA
(on back of Amplifier)
Open circuit voltage 5 V; Short circuit current 1 mA
(on back of Amplifier)
Open circuit voltage 5 V; Short circuit current 1 mA
(on back of Amplifier)
Open circuit voltage 5 V; Short circuit current 1 mA
(on back of Amplifier)
EMG 1-2 switches [EMG1] and [EMG2]
MESSAGE 1-3 switches [MESSAGE1-3]
LCD: 16 characters x 2 lines
MENU switch [MENU], ENTER switch, CANCEL switch [CANCEL],
SELECT dial [SELECT], SCHEDULE switch [SCHEDULE], CLK ADJ
switch [CLK ADJ.]
REC IN knob [REC IN]
PHONES knob [PHONES]
OUTPUT knob [OUTPUT]
SD memory card (Panasonic cards are recommended)
*Up to a maximum of 2 GB
WAV format: 44.1 kHz, 16 bit, MONO
MP3 format: 44.1 kHz, 128 kbps, STEREO
* STEREO audio signals are played back mixed on both
channels.
WAV format: 44.1 kHz, 16 bit, MONO
* Maximum continuous recording time is 10 minutes.
Schedule pattern assigned to day of the week
9 types of schedule patterns
999 steps possible for each pattern
100 types of messages or combined messages can be
set for each step
2 types of messages, EMG1 message and EMG2 message can be
written to the internal memory
Each message has a signal tone (10 seconds) and a message
(20 seconds)
ACCESSORIES
Operating Instructions (this manual)..............................1 pc.
Support software (CD-ROM)..........................................1 pc.
SD memory card (64 MB) .............................................1 pc.
Use the following items for installation work.
Internal Connection Cables..........................................2 pcs.
Screws (M3 x 6) ...........................................................2 pcs.
DIMENSIONS
SELECT
SD CARD
21
SCHEDULE
CLK ADJ.
EMGMESSAGE
REC IN OUTPUTPHONES
CANCEL
13
RESET
ENTERMENU
WU-ZM001
2
124
206
194
45
4
7.5
22.5
Unit: mm