Panasonic WA-MA240N Stereo Amplifier User Manual


  Open as PDF
of 5
 
Mixing Power Amplifiers
WA-MA120N
WA-MA240N
OPTIONAL COMPONENTS & ACCESSORIES
Remote Control Microphone
WR-210AE
General
Power Supply
Ambient Temperature
Dimensions
Weight
Finishing
24 V DC, 45 mA or less (connection terminal)
0 °C - +45 °C
250 (W) mm x 55 (H) mm x 155 (D) mm (excluding projections and flexible
microphone)
Approx. 740 g {1.63 lbs}
Top case : OA ivory color (Munsell value 5.5Y7.5/0.3 approximate color)
Bottom case: Gray color (Munsell value N5.5 approximate color)
Audio-signal Input/Output
Frequency Characteristic
Distortion
Microphone Input
S/N Ratio
LINE IN
S/N Ratio
Audio Output
Record Output
Line: 50 Hz-15 000 Hz -3±2 dB
1 % or less (at 1 000 Hz)
Unidirectional ECM microphone length: 350 mm
Input Sensitivity: -49 dBV (-44 dBV at factory)
50 dB minimum
ø
6.3 mm tip sleeve phone jack unbalanced
Input Sensitivity: -12 dBV (-2 dBV at factory)
Input impedance 10 kΩ
70 dB minimum
Connection terminal H,C, COM (0 V) balance
Output Level:0 dBV, matching load impedance 600 Ω
ø
6.3 mm tip sleeve phone jack unbalanced
Output Level:0 dBV, matching load impedance 10 kΩ
Control Output (Quick connection terminal panel)
Control Capacity
Announcement Control
Zone Control
All-Zone Control
Call Sign Control
Priority Control
Max: 30 V DC, 80 mA DC
1 channel
1-10 channel
CK0 one channel
Rising, falling, 1 channel each
Priority input, priority output 1 channel each
Other
Operation Buttons
Indicators
Extension I/F Connector
Individual, microphone, channel, all-zone, call sign up/down, announce
OPERATE, ON AIR, BUSY
1
• This Remote Microphone is designed for
use with public address (PA) systems. It
supports both separate zone
announcement (10 broadcasts) and all-
zone announcement capabilities.
SPECIFICATIONS
DIMENSIONS
Unit: mm
Panasonic
Remota Microphone WR-210A
5
4
3
2
1
10
9
8
7
6
LINE ALL CALL
CALL
MIC ANNOUNCE
SING
BUSY ONAIR
OPERATE
WR-210AE
155
360 50
250
50 (5)
46 (5)
DISTRIBUTED BY:
• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
Trademarks and registered trademarks
– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
http://panasonic.net/pss/pa/
Printed in Japan (1N-750C)
Remote Microphone
WR-201E
DIMENSIONS
WR-201E
Unit: mm
107
155
50 (5)
46 (5)
360 50
Panasonic
Remota Microphone WR-210E
SPECIFICATIONS
General
Power Supply
Ambient Temperature
Dimensions
Weight
Finishing
24 V DC, 45 mA or less(connection terminal)
0 °C - +45 °C
107 (W) mm x55 (H) mm x155 (D) mm
(excluding projections and flexible microphone)
Approx. 400 g
Top case : OA ivory color (Munsell value 5.5Y7.5/0.3 approximate color)
Bottom case: Gray color (Munsell value N5.5 approximate color)
Audio-signal Input/Output
Frequency Characteristic
Distortion
Microphone Input
S/N Ratio
LINE IN
S/N Ratio
Audio Output
Call Sign
Line : 50 Hz-15,000 Hz ±3 dB
1 % or less (at 1 000 Hz)
Unidirectional ECM microphone
Input Sensitivity : -49 dBV (-44 dBV at factory)
50 dB minimum
ø
3.5 mm stereo mini jack
Input Sensitivity : -12 dBV (-2 dBV at factory)
Input impedance 10 kΩ
70 dB minimum
Connection terminal H,C, balance
Output Level : 0 dBV, matching load impedance 600 Ω
2-tone signal
Control Output
Announcement Control
Call Sign Control
1 channel, connection terminal, max DC 30 V, DC 20 mA
1 channel
Other
Operation Buttons
Indicators
Microphone line, call sign
OPERATE, ON AIR
• Designed the MIC and LINE buttons allow
you to select mic audio or line audio for
announcement.
next