Filter
Top Products
RQ-L70
i
i
C
i
Power Sources
Dry cell batteries
Use the two R6/LR6 (UM-3) batteries.
When the batteries are weak, the
B
[
] lamps will turn off one by one.
AC adaptor
Connect the Panasonic AC adaptor (RP-
AC31B, not included) to
@
[
K].
Tape Playback
1. Insert the tape.(You can use normal
position type tapes only.)
2. Slide up
>
[ ] to release
pause.
3. Set
<
[ ] to [ ] or [ ].
Use the same setting you used when
the recording was made.
4. Press
9
[
1
] to start playback.
5. Adjust the volume with
5
[ ].
Recording
1. Insert the tape.(You can use normal
position type tapes only.)
2. Slide up
>
[ ] to release
pause.
3. Set
<
[ ] to [ ] or [ ].
To record sound at a normal
speed
2 To record about twice the length
of the tape for long meetings, etc.
4. Press
7
[¥ ] to start recording.
9
[
1
] is also pressed with
7
[¥
].
Auto stop
During playback or recording, when the
tape reaches its end, the automatic stop
system will release
9
[
1
] or
7
[¥
] and automatically turn off the unit.
To stop playback/recording
Press
8
[∫ ].
To stop playback/recording
temporarily
Slide down
>
[ ].
To resume, slide up
>
[ ] again.
To listen with an earphone
Connect the stereo earphones (included)
to
6
[Ë].
When playing the sound through the
earphones, volume can be adjusted with
5
[ ].
How to use the tape counter (
2
) and
the reset button (
1
)
The digits advance with the tape to
provide a reference to quickly find a
desired portion of tape.
The digits return to “ 0 0 0 ” when the reset
button is pressed.
To fast forward or rewind
Press
:
[
6
] (rewind) or
;
[
5
] (fast forward) in
the stop mode.
To cue and review
Sound can be monitored at a high speed
as long as
:
[
6
]
(review) or
;
[
5
] (cue) is
held down during playback.
When the button is released, normal
playback will start.
To change the playback speed
Adjust the speed with
A
[ ].
Follow up recording
Recording can be started during playback
by simply pressing
7
[¥ ].
Quick review
The review operation is possible during
recording by pressing
:
[
6
], only the
7
[¥ ] will be
released, and playback begin.
To record through an external
microphone
Plug the external microphone (included)
into
4
[
].
≥You can use a condenser microphone
with or without built-in power supply.
The numbers
B
- refer to the illustration on page 2.