Filter
Top Products
8
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the table do not solve the problem, refer to the
“Customer Services Directory” on page 5.
On your home theater unit
The wireless link indicator (e.g. “ [W] ” or LED)
does not light.
≥Ensure that the digital transceiver is fully inserted into the slot of the home theater unit.
≥Check that the home theater unit is turned on.
The wireless link indicator (e.g. “ [W] ” or LED)
is flashing.
≥There is no link between the home theater unit and the wireless sound system. Check that the wireless sound system is plugged
into the AC outlet.
≥Ensure that the selector on the wireless sound system is set to MAIN SET.
≥Ensure that the wireless sound system is within 15 m (49 ft) of the home theater unit.
≥When the SH-FX60 wireless system is paired with the SB-FX80 wireless sound system, ensure that the SH-FX60 is plugged into
the AC outlet.
There is no sound when the selected source
on the home theater unit is “REAR MUSIC P.”.
≥The “REAR MUSIC P.” source is not available for the SH-FX80 wireless sound system.
To play audio from an external device through your home theater unit, connect to the MUSIC PORT on the home theater unit and
select “FRONT MUSIC P.” as the source. (Refer also to your home theater unit’s operating instructions.)
≥When using the wireless sound system as a stand-alone audio amplifier, ensure that the selector on the wireless sound system is
set to MUSIC PORT.
The wireless link indicator (e.g. “ [W] ” or LED)
is lit, but there is no sound from the SB-FX80
wireless sound system.
≥
When playing from a 2-channel audio source (e.g. AM/FM station, music CD, etc.), turn on one of the surround sound effects of
your home theater system (e.g. SURROUND MUSIC) in order to utilize all audio channels.
(Refer also to your home theater unit’s
operating instructions.)
≥When using the wireless sound system as a stand-alone audio amplifier, ensure that the selector on the wireless sound system is
set to MUSIC PORT.
≥
When the SH-FX60 wireless system is paired with the SB-FX80 wireless sound system, the wireless link indicator on your home
theater unit (e.g. “
[W]
” or LED) will light when there is a link with the SH-FX60, even when there is no link with the SB-FX80.
1. Check that the SB-FX80 is plugged into the AC outlet.
2. Ensure that the selector on the SB-FX80 is set to MAIN SET.
3. Ensure that the SB-FX80 is within 15 m (49 ft) of the home theater unit.
4. Adjust the volume of your home theater unit.
5. If there is still no sound, repeat the pairing procedure on page 4.
The wireless link indicator (e.g. “ [W] ” or LED)
is lit, but there is no sound from the SH-FX60
wireless system.
≥
When playing from a 2-channel audio source (e.g. AM/FM station, music CD, etc.), turn on one of the surround sound effects of
your home theater system (e.g. SURROUND MUSIC) in order to utilize all audio channels.
(Refer also to your home theater unit’s
operating instructions.)
≥
The wrong transceiver card has been inserted into the home theater unit. (The SH-FX80T transceiver card cannot be used with the
SH-FX60 wireless system.)
1. Turn off your home theater system, remove the SH-FX80T transceiver card, and insert the SH-FX60T transceiver card.
2. Turn on your home theater system, and then follow the pairing procedure on page 4.
3. Adjust the volume of your home theater unit.
After pairing the SB-FX80 wireless sound
system with the SH-FX60 wireless system,
audio output is erratic.
≥Ensure that the SH-FX60 wireless system is unplugged, and then repeat the pairing procedure on page 4.
Specifications
Output power
RMS output power stereo mode
Surround Ch (both ch driven) 65 W per channel (4 ≠), 1 kHz, 10 % THD
Total RMS stereo mode power 130 W
FTC output power stereo mode
Surround Ch (both ch driven) 40 W per channel (4 ≠), 120 Hz–20 kHz, 1 % THD
Total FTC stereo mode power 80 W
[Surround\speakers\SB-FX80]
Type 1 way, 1 speaker system (Bass reflex)
(L and R ch in one box)
Speaker unit(s) Impedance 4 ≠
Full range 6.5 cm (2
1
/2z) Cone type
Input power (IEC) 90 W
§
(Max)
Output sound pressure 80 dB/W (1.0 m)
Frequency range 100 Hz–25 kHz (j16 dB)
115 Hz–22 kHz (j10 dB)
Wireless module
Frequency range 2.436 to 2.458 GHz
RF output power 19 dBm (Max)
MUSIC PORT terminal
Input sensitivity 100 mV
Input impedance 4.7 k≠
Terminal Stereo, 3.5 mm (
1
/8
z
) jack
Power supply AC 120 V, 60 Hz
Power consumption Digital transceiver 0.85 W
Wireless sound system 30 W
Dimensions (WtHtD)
Digital transceiver 97 mmk47.5 mmk8.5 mm (3
13
/16
zk
1
7
/8
zk
11
/32
z
)
Wireless sound system 430 mmk197.5 mmk174.5 mm (16
15
/16zk7
25
/32zk6
7
/8z)
Mass
Digital transceiver 0.03 kg (0.07 Ibs)
Wireless sound system 2.7 kg (6 Ibs)
Operating temperature range r5 oC to r35 oC (r41 oF to r95 oF)
Operating humidity range 5% to 90% RH (no condensation)
§
Rating with low-cut filter equipped amplifier
[Note]
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by a digital spectrum analyzer.
AMPLIFIER SECTION
SPEAKER SECTION
RF SECTION
GENERAL
Power consumption in standby mode 3W