Filter
Top Products
FUNCTION SELECTOR SWITCH
Slide the FUNCTION selector switch to select TUNER or CD.
ANTENNAS
AM- this unit has a built-in ferrite bar antenna, which eliminates the need for an external antenna,
and provides adequate reception in most areas. If reception is weak, turn the unit to
improve reception.
FM- the FM line antenna on the rear of the unit is for FM reception only. Unwind this antenna
completely and orient the wire until you find the position that provides the best reception.
Slide the BAND switch to select, AM, FM, or FM STEREO broadcasts.
TO LISTEN TO THE RADIO
TUNER OPERATION
PHONES (HEADPHONE) JACK
A headphone jack is provided for private listening. To listen to the unit with headphones (not
included), set the volume to minimum and insert the 3.5mm mini stereo plug from the headphones
into the PHONES jack. The speakers will be disconnected when a plug is inserted in the jack. Adjust
the VOLUME control and BASS BOOST button as desired.
MUTE
Press the MUTE button on the remote control to temporarily cut off the sound; the STANDBY/MUTE
indicator will blink. Press this button again to restore the sound.
ELECTRONIC ROTARY VOLUME CONTROL
Gently turn clockwise to increase the volume and counterclockwise to decrease the volume.
TO TURN THE UNIT ON AND OFF
Press the POWER button on the main unit or remote control to turn the unit on; the
STANDBY/MUTE indicator will go off. Press the POWER button again to turn the unit off; the
STANDBY/MUTE indicator will light.
NOTICE: AC POWER 120V~~60Hz
OPERATING INSTRUCTION