Onkyo TX-SR600 Stereo System User Manual


 
The Global Standard Has Just Been Raised
The TX
-
SR600 is one of the finest receivers created by Onkyo, or anyone else! The features that distinguished this receiver from others on
the market and made it one of the world’s bestselling A/V components just got better. Onkyo standards, WRAT and Optimum Gain Volume
Circuitry are combined with an added sixth channel to bring you the latest sound formats, Dolby Digital EX and DTS
-
ES. Experience your
home theater the way it was meant to be with the TX
-
SR600.
TX
-
SR600
DIGITAL SURROUND HOME THEATER RECEIVER
Dolby Digital EX
Dolby Digital EX creates six full-bandwidth output channels from 5.1-channel
sources.This is done using a matrix decoder that derives three surround channels
from the two in the original recording. For best results, Dolby Digital EX should
be used with movie soundtracks recorded with Dolby Digital Surround EX.
Designed to Handle Today’s and Tomorrow’s High-Resolution
Multichannel A/V Sources
To accommodate the wide dynamic range of sources like DVD-Audio and Super
Audio CD
(
SACD
)
, the TX-SR600 delivers a stereo frequency response from
10 Hz to 100,000 Hz.The unit also features a 5.1-channel input, meaning it’s
ready for new multichannel formats down the road.
Optimum Gain Volume Circuitry
To produce volume at low levels, conventional volume attenuation methods
must initially drop a signal close to the noise floor.This often taints the signal
with a small amount of noise, which becomes amplified when the signal is
amplified. Onkyo’s Optimum Gain Volume Circuitry solves this problem by
adjusting the gain so that less than half the typical amount of attenuation is
needed.This ensures that the signal never comes close to the noise floor,
and thereby eliminates the possibility of noise contamination that plagues
conventional volume-attenuation designs.
Color-Coded Speaker Terminals
No more worries about which speaker wire goes to which speaker terminal.
The TX-SR600 features color-coded speaker terminals that allow you to easily
connect the correct wire to the correct terminal. Simply attach the color-coded
label to the speaker cable, attach the cable to the same colored speaker terminal
for fast speaker connection.
CinemaFILTER
The tonal balance of a film soundtrack will be edgy and “bright”when played
back over audio equipment in your home because film soundtracks are
designed to be played back in large theaters using different equipment.
Onkyo had developed its own enhancement that restores the correct tonal
balance for watching a movie soundtrack in your smaller home theater.
Crossover Adjustment for Bass Management
Previously crossover frequency was fixed at 80 Hz.With Crossover Adjustment,
you can set the frequency at 80/100 or 120 Hz depending on your speakers’
bass playback ability.This lets you more accurately match the performance
characteristics of the subwoofer to your front speakers.
Outstanding Value
The TX-SR600 offers the performance of high-end receivers at a fraction of the
price by sharing many of the same precision parts (heat sink, bus bars, metal
work, etc.) and circuit design
(
WRAT,Non-Scaling Configuration, high-current
low-impedance drive) as its more expensive siblings.This drastically reduces
tooling costs, and the savings are passed on.
Available in Gold or Black